[Asterisk-Users] Bridging 2 Zap channels - SOLUTION

[Paul Hewlett]

On Sunday 17 April 2005 15:14, Paul Hewlett wrote:
> On Saturday 16 April 2005 14:00, steve at daviesfam.org wrote:
> > On Fri, 15 Apr 2005, Paul Hewlett wrote:
> > > I am running * 1.0.6 with 8 analogue phone lines connected to 2 cards -
> > > lspci reveals these as :
> > >
> > > The problem is that under certain circumstances (which I am unable to
> > > determine) * bridges 2 of the Zap channels together even though I can
> > > see no possible way in the dialplan. This then permanently consumes 2
> > > lines leaving only one available. I have been watching the system for 2
> > > days now and have managed to trap it into this condition twice - the
> > > system is only under light load.
> >


> > I believe I'm coming to you on Tuesday to look at this and some other
> > things.  But I think I know what's wrong from your description...
>

> > Are you using SNOM phones?  Go to the advanced setup and turn off the
> > "bridge calls on hangup" option.
>

     For the record for everyone on this list, the SNOM phones have an option 
"Transfer on onhook" in the advanced settings page.. Set this to "No" and the 
bridging will stop.

PAul



-- 
Paul Hewlett (Linux #359543) 
Tel: +27 21 852 8812      Cel: +27 72 719 2725      Fax: +27 86 672 0563
--