[Asterisk-Users] Bridging 2 Zap channels

[steve at daviesfam.org]

On Fri, 15 Apr 2005, Paul Hewlett wrote:

> I am running * 1.0.6 with 8 analogue phone lines connected to 2 cards - lspci 
> reveals these as :
> 
> 03:04.0 Communication controller: Tiger Jet Network Inc. Model 300 128k
> 03:05.0 Communication controller: Tiger Jet Network Inc. Model 300 128k
> 
> The wcfxs module is loaded successfully and I have the first 3 lines actually 
> connected. /etc/asterisk/zapata.conf is correct (channels => 1-3)
> 
> The problem is that under certain circumstances (which I am unable to 
> determine) * bridges 2 of the Zap channels together even though I can see no 
> possible way in the dialplan. This then permanently consumes 2 lines leaving 
> only one available. I have been watching the system for 2 days now and have 
> managed to trap it into this condition twice - the system is only under light 
> load.

Hi Paul,

I believe I'm coming to you on Tuesday to look at this and some other 
things.  But I think I know what's wrong from your description...

Are you using SNOM phones?  Go to the advanced setup and turn off the 
"bridge calls on hangup" option.

Regards,
Steve