[Asterisk-Users] ISDN BRI and signalling

[Eugenio De Vena]

The problem of Q931 SETUP I have also depends on Junghanns and they
do not support in any way the products the sell...

----- Original Message ----- 
From: "Stefan Gofferje" <stefan at gofferje.homelinux.org>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Friday, April 15, 2005 8:30 AM
Subject: Re: [Asterisk-Users] ISDN BRI and signalling


> Bob van der Moezel schrieb:
>
> >I want to signal BUSY condition to a bristuffed HFC-S ISDN line.
> >
> >However:
> >  "exten => s,1,Busy" has no effect,
> >  "exten => s,1,Playtones(Busy)" is not audable over unanswered line (I
> >live in the Netherlands...)
> >
> >So I currently do:
> >+ exten => s,1,Answer
> >+ exten => s,2,Playtones(Busy)
> >+ exten => s,3,Busy
> >Which obviously is not an ideal solution.
> >
> >Is there a way to get real signalling out a bristuffed HFC-S ?
> >
> >
> I have the same problem with a Fritz!PCI and chan_capi as external line.
> I have a HFC-S card in NT mode as internal ISDN. On this card, Busy and
> Congestion do work.
> As both drivers came from Junghanns, I suppose, this is a problem with
> the drivers...
>
> Regards,
> Stefan
>
> -- 
>  (o_   Stefan Gofferje          | Linux Systems Specialist
>  //\   Reg'd Linux User #247167 | Network Security Specialist
>  V_/_  Heckler & Koch - the original point and click interface
>
>
>