[Asterisk-Users] multiple line usage on Polycom IP300

[Josiah Bryan]

On Tuesday 12 April 2005 11:00 am, MobilPete wrote:
> we tried both, setting it as same and also seperate. but niether worked.

I've never used the IP300, but I do have an IP500 on our network. It has 3 
line buttons, each line can do 2 simultaneous calls. Each line button 
registers as its own SIP device (op-1, op-2, and op-3).

I wrote an AGI script to dial the IP500. It uses the * Manager to do 'show 
channels' to find the line button on the IP500 with the least number of 
simultaneous calls (e.g. which SIP device [SIP/op-1, SIP/op-2, or SIP/op-3]) 
then the AGI script just redirects the call to the next available line on the 
IP500 using AGI 'EXEC' to run the 'Dial' app.

If anybody is interested in the script, ill try to clean it up enough to post.

-josiah


> ----- Original Message -----
> From: "Josiah Bryan" <jbryan at productiveconcepts.com>
> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> <asterisk-users at lists.digium.com>
> Sent: Tuesday, April 12, 2005 9:41 AM
> Subject: Re: [Asterisk-Users] multiple line usage on Polycom IP300
>
> > On Tuesday 12 April 2005 10:18 am, MobilPete wrote:
> >> can anyone help ??
> >> trying to get Polycom IP300 to utilize both lines, would like calls to
> >> roll
> >> to open line when incoming call arrives while user is on line 1. Looked
> >> everywhere and tried many things with no luck.
> >
> > Do you have your lines register sepratly? E.g. is there a seperate entry
> > in
> > sip.conf for each line or do they both register as the same sip device?
> >
> >
> >
> > --
> > Josiah Bryan
> > IT Coordinator
> > Productive Concepts, Inc.
> > jbryan at productiveconcepts.com
> > (765) 964-6009, ext. 224
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users