[Asterisk-Users] Dialogic D/300SC-1E1 and D/600SC-2E1 with *

[James Taylor]

It can be done but, if you want support just buy a new Digium or Sagnoma  
card.

It's not worth the trouble for one machine to use the Dialogic card.
I wrote apps for dialogic cards for years under DOS and windows NT.
When I got ready for Asterisk, I had the same thoughts - I can use all of  
these cards.
Forget it.

I looked at it and it was cheaper and quicker to just buy a card an be up  
and running tomorrow.

However, if you get a response from someone who has done it and is willing  
to assist you, go for it.

99.5% non-dialogic 0.5 % dialogic, just guess how  much support is  
available...

I understand that the only difference should be the drivers, but if you  
have a problem, then everyone will say "...I'm not sure about the dialogic  
thing if you had a Zap card..."

James

On Tue, 5 Apr 2005 21:09:41 +0100, Richard Dutton <richard at dutton.me.uk>  
wrote:

> Hi,
>
> I've seen from the Asterisk Hardware list that the Dialogic D/300JCT-1E1  
> and
> D/600JCT-2E1 cards are supported by Asterisk, can anyone tell me if the
> D/300SC-1E1 and D/600SC-2E1 cards are as a client has quite a few of  
> these
> particular model and would like to use them in an Asterisk server.
>
> Cheers
>
> Richard
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
James Taylor
MetroTel
3505 Summerihll Road
Suite 11
Texarkana, Texas  75503
903-793-1956