[Asterisk-Users] rookie getting started question

[Eric Wieling aka ManxPower]

Randy Paries wrote:
> Thanks for the info
> 
> OK my first questions....
> 
> I have edited my zaptel.conf
> ============================
> fxsks=1-2
> loadzone = us
> defaultzone=us 
> 
> I have two X100P cards installed
> 
> When I run  /sbin/ztcfg
> ZT_CHANCONFIG failed on channel 2: Invalid argument (22)
> Did you forget that FXS interfaces are configured with FXO signalling
> and that FXO interfaces use FXS signalling?
> 
> If I set fxsks=1 it works ok.

Do an lspci and make sure your BIOS is seeing both cards.  You can do an 
lspci -v to see what IRQs the cards are on.