[Asterisk-Users] H.323 call '.....' cleared, reason 8 (Transport failure)

[Cenk Yabas]

I installed the oh323 channel driver and registered to the gate keeper
succesfully.

I come through the GK, ring the dialed number for about 0.5 seconds and
loose the line. I contacted the GK and they report that they receive the
correct dialstring to route the call but the call is ended by my side.

The dialstring looks like this:

exten => _.,1,Dial(OH323/${EXTEN},60,r)

I use the following channel driver:

asterisk-oh323-0.7.1

openh323-Janus_patch4-src

pwlib-Janus_patch4-src

and the message on asterisk console looks like this:

-- Registered with gatekeeper 'netonegk at n193-192-100-92.netone.com.tr'.

-- Executing Dial("SIP/2000-c9fc", "OH323/0012029361212|60|r") in new stack

-- H.323 call to 0012029361212 with codec(s) g729

-- Called 0012029361212

-- H.323 call 'ip$localhost/2209' cleared, reason 8 (Transport failure)

-- OH323/L2209 is circuit-busy

-- Hungup 'OH323/L2209'

== Everyone is busy/congested at this time (1:0/1/0)

== Auto fallthrough, channel 'SIP/2000-c9fc' status is 'CONGESTION'

-- Executing Dial("SIP/2000-c9fc", "OH323/h|60|r") in new stack

-- H.323 call to h with codec(s) g729

-- Called h

-- Hungup 'OH323/L2210'

== Spawn extension (local, h, 1) exited non-zero on 'SIP/2000-c9fc'

-- H.323 call 'ip$localhost/2210' cleared, reason 1 (Cleared by local user)

My oh323 configuration:

 Configuration of OpenH323 channel driver
------------------------------------------
Version: 0.7.1
Listening on address: 0.0.0.0:1720
Gatekeeper used: netonegk at n193-192-100-92.netone.com.tr (Registered)
FastStart/H245Tunnelling/H245inSetup: OFF/ON/ON
Supported formats in pref. order: g729<0>
Jitter buffer limits (min/max): 20-100 ms
TCP port range: 5000 - 31000
UDP (RAS) port range: 5000 - 31000
UDP (RTP) port range: 10000 - 20000
IP Type-of-Service value: 0
User input mode: 2
Max number of inbound H.323 calls: 10
Max number of outbound H.323 calls: 10
Max number of simultaneous H.323 calls: 20
Max call rate (ingress direction): 1.00/30


What might be the problem?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050402/132c3d86/attachment.htm