Cisco Downloads --> was --> Re: [Asterisk-Users] Cisco 7960 and Asterisk...not working...

[Christopher Jacob]

I just had to deal with this yesterday. I called Cisco and they gave me a
part number for the support contract. I looked around and it was $90... I
posted back to this list and was happy when someone gave me the correct part
number, which at CDW was $10... Not too bad.

Although I can't believe Cisco waists time with $10 service contracts. At
that point just make the damn thing free.

Anyway, I don't have the email in front of me but google the list from
yesterday (Friday) and I'm sure you will come across it.

~c

Message: 10
Date: Sat, 25 Sep 2004 18:45:44 +0000
From: C Wegrzyn <lists at garbagedump.com>
Subject: Re: [Asterisk-Users] Cisco 7960 and Asterisk...not working...
To: Asterisk Users Mailing List - Non-Commercial Discussion
	<asterisk-users at lists.digium.com>
Message-ID: <4155BCD8.8000107 at garbagedump.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Is there a place to get the software load for the Cisco phone without 
having a support contract? Buying the phone was costly enough, but now 
needing to pay for the software to "fix" it is really poor!

Chuck Wegrzyn

Chad Brown wrote:

>Chuck,
>
>The first thing I would do is to upgrade the load to version 6 or
>higher. I'm running the latest...version 7.2. (I'm very happy with it)
>
>Are you using TFTP to load the configuration or manually configuring the
>7960? I know it's a pain to setup TFTP just for a quick test. However,
>it's well worth it. If you have a CCO account you can find the latest
>load and config files here:
>http://www.cisco.com/cgi-bin/tablebuild.pl/sip-ip-phone7960
>
>After getting the infrastructure in place the following link was all I
>needed to get my 7960 phones working properly:
>http://www.voip-info.org/wiki-Asterisk%20phone%20cisco%2079xx
>
>However, the 7960 does have some basic error logging. I'm not sitting in
>front of it right now so I can't tell you the key combinations. 
>
>Hint: I went from version 3.2 like you to 7.2. However, as an interim
>step I had to go to 6.0 first.
>
>Thanks,
>
>Chad
>
>-----Original Message-----
>From: asterisk-users-bounces at lists.digium.com
>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of C Wegrzyn
>Sent: Saturday, September 25, 2004 11:03 AM
>To: Asterisk Users Mailing List - Non-Commercial Discussion
>Subject: [Asterisk-Users] Cisco 7960 and Asterisk...not working...
>
>Hi! I have Asterisk up and running and have KPhone, IAXtel and FWD 
>connected to it and working. I have a Cisco 7960 with version 3 (App. 
>Load ID POS3-2-00) software. I have configured the 7960 correctly, I
>think;
>
>I have set everything - name, shortname, auth.name and display name set 
>to 200.
>I have set the password to 200.
>I've set the proxy address/port to 192.168.1.117/5060.
>
>I can't seem to get the phone to connect to Asterisk, though Kphone 
>works fine. Does anyone have an idea of what I am doing wrong?
>
>TIA,
>Chuck Wegrzyn
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>  
>
**********************************************