[Asterisk-Users] Help with dialing out with TDM400P

Lyle Giese lyle at lcrcomputer.net
Sat Sep 25 08:44:01 MST 2004


I don't see anything posted here in extensions.conf to allow dialing out on
group 2.

You need something like this:


[outgoing]

exten => _9X.,1,Dial(Zap/g2/${EXTEN:1})
exten => _9X.,2,Congestion()

And add the context outgoing to those extensions that you allow to dial out
to the PSTN.

Lyle

----- Original Message ----- 
From: "James Bean" <james at hdcs.com.au>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Saturday, September 25, 2004 8:28 AM
Subject: [Asterisk-Users] Help with dialing out with TDM400P



Scenario,

I got some very good help earlier from Joseph getting me up and started
but I have a couple of small problems still.

Setup: FC2 Asterisk 1.0 Zaptel 1.0, TMP400P, FXS Port 1 FXO Port 4

Analog dialout line and Analog handset plugged in.

Problems:

1.
Incoming calls work and the phone rings and can be answered no problems,
(although I wouldn't mind being able to adjust the ring but that's not
important), I can't ring out, I just get a busy signal and nothing comes
up on the console. I am pretty sure its just a simple line missing from
extensions.conf.

2.

I am based in australia and when I have an incoming call with callerid
turned on then I get the following error on console.

    -- Zap/1-1 is ringing
Sep 25 22:49:14 WARNING[-203428944]: chan_zap.c:3413 zt_handle_event:
Didn't finish Caller-ID spill.  Cancelling.

-----------------------------------------------

/etc/zaptel.conf

fxols=1
fxsls=4
loadzone=au

/etc/asterisk/extensions.conf

[pstn]

exten => s,1,NoOp(Comment Only: Call from ${CALLERIDNUM}) ; Just put a
comment in the CLI for info.
exten => s,2,Dial(Zap/g1,45,t)  ;Dial the group=1 zap card mod above
#exten => s,3,VoiceMail(u100)    ;Whatever box you want.

[internal]
exten => i,1,Playback(invalid)
exten => i,2,Hangup
exten => t,1,Hangup

exten => 099,1,Echo     ;simple echo test

/etc/asterisk/zapata.conf

[channels]
context=default
switchtype=national
usecallerid=yes
hidecallerid=no
callwaiting=no
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
group=1
signalling=fxo_ls
callgroup=1
pickupgroup=1
immediate=no
context=internal
busydetect=yes
callerid="James Bean<690>"      ;assuming extension 690
mailbox=690                     ;stutter tone for voicemail - you can
use an optional context here
transfer=yes
channel=>1
group=2
signalling=fxs_ls
context=pstn
channel=>4

-----------------------------------------------

Any help would be very much appreciated.

James
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users




More information about the asterisk-users mailing list