[Asterisk-Users] more on spandsp and partially received fax

Maurizio Marini maumar at datalogica.com
Tue Sep 21 08:03:46 MST 2004


more detailed output


Sep 21 15:54:31 DEBUG[1120357296]: pbx.c:1255 pbx_extension_helper: Launching 'RxFAX'
Sep 21 15:54:31 DEBUG[1120357296]: channel.c:1699 ast_set_read_format: Set channel Zap/1-1 to read format SLINR
Sep 21 15:54:31 DEBUG[1120357296]: channel.c:1666 ast_set_write_format: Set channel Zap/1-1 to write format SLINR
Changed from phase 0 to 1
Slow carrier up
Slow carrier down
Start receiving document
Changed from phase 1 to 4
Sending ident
>>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Preferred octets: 256
Can receive fax
Supported data signalling rates: V.27ter and V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Minimum scan line time for higher resolutions: T15.4 = T7.7
>>> DIS: 80 00 ce f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
T4 timeout in state 9
Changed from phase 3 to 4
Sending ident
>>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Preferred octets: 256
Can receive fax
Supported data signalling rates: V.27ter and V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Minimum scan line time for higher resolutions: T15.4 = T7.7
>>> DIS: 80 00 ce f0 80 80 01
T2 timeout
Start receiving document
Sending ident
>>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Preferred octets: 256
Can receive fax
Supported data signalling rates: V.27ter and V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Minimum scan line time for higher resolutions: T15.4 = T7.7
>>> DIS: 80 00 ce f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
Slow carrier up
<<< DCS: 83 00 c6 f0 80 80 00
DCS with final frame tag
In state 9
DCS:
Can receive fax
Selected data signalling rate: V.29, 9600bps
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Minimum scan line time: 0ms
Minimum scan line time for higher resolutions: T15.4 = T7.7
Get at 9600
Changed from phase 3 to 5
Fast carrier up
Coarse carrier frequency 1688.02 (84)
Fast carrier down
Fast carrier up
Coarse carrier frequency 1700.01 (66)
Training error 18.034745
Training succeeded (constellation mismatch 10.798613)
Fast carrier trained
Fast carrier down
Changed from phase 5 to 4
Start rx document - compression 2
Start rx page
>>> CFR: 84
HDLC underflow in state 5
Post trainability
Changed from phase 4 to 5
Fast carrier up
Coarse carrier frequency 1699.99 (66)
Training error 9.098502
Training succeeded (constellation mismatch 8.396236)
Fast carrier trained
Fast carrier down

Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 251 (got 3285, expected 1728).
Fax3Decode2D: (FakeInput): Uncompressed data (not supported) at scanline 252 (x 224).
Fax3Decode2D: Warning, (FakeInput): Premature EOL at scanline 252 (got 224, expected 1728).
Fax3Decode2D: (FakeInput): Bad code word at scanline 253 (x 1647).
Fax3Decode2D: Warning, (FakeInput): Premature EOL at scanline 253 (got 1647, expected 1728).
Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 254 (got 1776, expected 1728).
Fax3Decode2D: (FakeInput): Bad code word at scanline 255 (x 101).
Fax3Decode2D: Warning, (FakeInput): Premature EOL at scanline 255 (got 101, expected 1728).
Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 256 (got 2145, expected 1728).
Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 257 (got 1738, expected 1728).
Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 258 (got 2721, expected 1728).
Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 259 (got 1938, expected 1728).
Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 260 (got 2872, expected 1728).
Fax3Decode2D: (FakeInput): Bad code word at scanline 261 (x 555).
Fax3Decode2D: Warning, (FakeInput): Premature EOL at scanline 261 (got 555, expected 1728).
Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 262 (got 2526, expected 1728).
Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 265 (got 1729, expected 1728).
Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 266 (got 4882, expected 1728).
Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 268 (got 1885, expected 1728).
Fax3Decode2D: (FakeInput): Bad code word at scanline 270 (x 219).
Fax3Decode2D: Warning, (FakeInput): Premature EOL at scanline 270 (got 219, expected 1728).
Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 272 (got 4796, expected 1728).
Fax3Decode2D: (FakeInput): Bad code word at scanline 273 (x 1289).
Fax3Decode2D: Warning, (FakeInput): Premature EOL at scanline 273 (got 1289, expected 1728).
Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 274 (got 1757, expected 1728).
Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 277 (got 1745, expected 1728).
Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 278 (got 3531, expected 1728).
Fax3Decode2D: (FakeInput): Bad code word at scanline 279 (x 1430).
Fax3Decode2D: Warning, (FakeInput): Premature EOL at scanline 279 (got 1430, expected 1728).
Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 280 (got 1735, expected 1728).
Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 281 (got 2246, expected 1728).
Fax3Decode2D: (FakeInput): Bad code word at scanline 282 (x 964).
Fax3Decode2D: Warning, (FakeInput): Premature EOL at scanline 282 (got 964, expected 1728).
Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 283 (got 1734, expected 1728).
Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 284 (got 1729, expected 1728).
Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 285 (got 1729, expected 1728).
Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 287 (got 1735, expected 1728).
Fax3Decode2D: Warning, (FakeInput): Premature EOL at scanline 289 (got 0, expected 1728).

Page 1 of /var/spool/asterisk-fax/1095774866.2.tif:
290 rows received
0 total bad rows
0 max consecutive bad rows
Changed from phase 5 to 3
Slow carrier up
<<< EOP: 2f
EOP with final frame tag
In state 5
Changed from phase 3 to 4
>>> MCF: 8c
HDLC underflow in state 8
Changed from phase 4 to 3
Urgent handler
Slow carrier up
<<< DCN: fb
DCN with final frame tag
In state 8
Disconnecting
Changed from phase 3 to 7
Sep 21 15:55:08 DEBUG[1120357296]: app_rxfax.c:66 phase_e_handler: ==============================================================================
Sep 21 15:55:08 DEBUG[1120357296]: app_rxfax.c:67 phase_e_handler: Fax successfully received.
Sep 21 15:55:08 DEBUG[1120357296]: app_rxfax.c:68 phase_e_handler: Remote station id:
Sep 21 15:55:08 DEBUG[1120357296]: app_rxfax.c:69 phase_e_handler: Local station id:
Sep 21 15:55:08 DEBUG[1120357296]: app_rxfax.c:70 phase_e_handler: Pages transferred: 1
Sep 21 15:55:08 DEBUG[1120357296]: app_rxfax.c:71 phase_e_handler: Resolution:        1
Sep 21 15:55:08 DEBUG[1120357296]: app_rxfax.c:72 phase_e_handler: Transfer Rate:     9600
Sep 21 15:55:08 DEBUG[1120357296]: app_rxfax.c:73 phase_e_handler: ==============================================================================
Changed from phase 7 to 8



-- 
Maurizio Marini         GSM +39-335-8259739
Work: +39-0721-855285   Fax +39-0721-859609
Home: +39-0721-950396   IAXTel: (700) 350-1234



More information about the asterisk-users mailing list