[Asterisk-Users] Error in zapata/zaptel configuration

[Sam Njenga]

Hi
I have reason to believe that I have errors in my configuration because when I make a call I can see the H323 call executed ok but not being processed by Zap. I am using R2 signaling ( which I know is incomplete but should I not see it when I debug Zap channel?). I think there is a problem with my Zapata and zaptel configs . I understand that R2 can work with R2 China and R2 Argentina. Currently am working with R2 Argentina. The E1 is ok as when I configure a Cisco 5350 to work with it, it works perfectly.

Here is my current configuration 

zapata.conf

[channels]
context=default
signalling=r2
r2country=ar

group=1


callgroup=1
pickupgroup=1

transfer=yes
echocancel=yes
callprogress=yes
immediate=yes

channel => 1-15,17-31

/etc/zaptel

span=1,0,0,cas,hdb3
cas=1-15:1001
cas=17-31:1001

Extentions.conf

[general]
static=yes
writeprotect=no

[globals]
CONSOLE=Console/dsp                             ; Console interface for demo
IAXINFO=guest                                   ; IAXtel username/password
TRUNK=Zap/1                                   ; Trunk interface

[local]
include => default

[default]


exten => 203755343,1,Dial(Zap/g1/203755343)

The error I get is 

Sep 17 14:18:20 WARNING[1185515456]: pbx.c:1839 ast_pbx_run: Timeout, but no rule 't' in context 'default'
    -- Executing Dial("H323/ip$80.247.147.146:3852/19860", "Zap/g1/203755343") in new stack
    -- Couldn't call g1/203755343
    -- Hungup 'Zap/1-1'

h323 --> Asterisk ---> h323  works ok

 Regards 
Sam
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040917/e64a0dd0/attachment.htm