[Asterisk-Users] Non-PRI T1 showing red

[lll at advancedcommunications.us]

Could anyone with any experience with * over a non-PRI T1 help this newbie?
I have a fractional T1 that is working fine through a channel bank, but I
can't get any response on * using a T400P. My analog line and the extensions
work fine, but the T400P port 1 shows a red led (what exactly does that tell
me?). I brought up zttool which shows a condition red also, but ztcfg shows
nothing amiss.  There is no change when I unplug the cable to the T1 or
re-insert it.  When I load * it gives no error messages, at least none that
appear to be such to me.  I've looked thru all the related wiki info that I
can find but I'm stumped.

I am loading the drivers in the following order:

modprobe zaptel
modprobe tor2
modprobe wcfxo
modprobe wcfxs

Here's my configs in simplified form:


#------ /etc/zaptel.conf -- Zaptel Configuration File
# T400P
span=1,1,0,esf,b8zs
e&m=1-3
unused=4-24

# X100P
fxsks=97

# TDM40
fxoks=98-101

loadzone = us
defaultzone=us


;------ /etc/asterisk/zapata.conf -- Zapata Configuration file
[channels]
; T400P with fractional T1 in port 1, ports 2-4 unused
echocancel=yes
echocancelwhenbridged=yes

signalling=em_w
group=1
usecallerid=no
context=incomingT1
channel => 1-3

; X100P pots line
group=2
signalling=fxs_ks
context=incomingPots
channel => 97

; TDM40 stations in ports 1-4
signalling=fxo_ks
group=

context=internal
callgroup=1
pickupgroup=1
channel => 98-101


;------ /etc/asterisk/extensions.conf -- extension definitions
;
[general]
static=no
writeprotect=no

[globals]
CONSOLE=Console/dsp     ; Console interface for demo
TGROUP=Zap/g1           ; T1 channels
PGROUP=Zap/g2           ; Pots channels

[incomingT1]
exten => s,1,Dial,Zap/98

[incomingDID]
exten => s,1,AGI(acs.agi)

[incomingPots]
exten => s,1,Dial,Zap/99

[internal]
ignorepat => 9
exten => _9X.,1,Dial,Zap/g2/${EXTEN:1}
exten => 111,1,Dial,Zap/98
exten => 222,1,Dial,Zap/99
exten => 333,1,AGI(lll-test.agi)
exten => 333,2,Hangup
exten => 444,1,AGI(acs.agi)