[Asterisk-Users] Asterisk is not "picking up the phone" withax100p card

Brent Franks mwless at mindworks.net
Wed Sep 15 16:57:06 MST 2004


Rodolfo,

Did you do a modprobe wcfxo

Also, did you perform a ztcfg -vvvv  after the modprobe?  What do the
two report?  Additionally, what does cat /proc/interrupts report?

- Brent

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of Rodolfo Grave
> Sent: Wednesday, September 15, 2004 6:39 PM
> To: david.carter at codepipe.com; Asterisk Users Mailing List - Non-
> Commercial Discussion
> Subject: Re: [Asterisk-Users] Asterisk is not "picking up the phone"
> withax100p card
> 
> I am just checking that right now, and NO, asterisk is not loading
> chan_zap.c... this is the error message:
> 
>   == Parsing '/etc/asterisk/zapata.conf': Found
> Sep 15 17:06:03 WARNING[16384]: chan_zap.c:765 zt_open: Unable to
> specify channel 1: No such device or address
> Sep 15 17:06:03 ERROR[16384]: chan_zap.c:5894 mkintf: Unable to open
> channel 1: No such device or address
> here = 0, tmp->channel = 1, channel = 1
> Sep 15 17:06:03 ERROR[16384]: chan_zap.c:8798 setup_zap: Unable to
> register channel '1'
> Sep 15 17:06:03 WARNING[16384]: loader.c:328 ast_load_resource:
> chan_zap.so: load_module failed, returning -1
>   == Unregistered channel type 'Tor'
>   == Unregistered channel type 'Zap'
> Sep 15 17:06:03 WARNING[16384]: loader.c:423 load_modules: Loading
> module chan_zap.so failed!
> dhcp-1110-4728:/etc/asterisk # Ouch ... error while writing audio
data:
> : Broken pipe
> 
> This is the content in my zapata.conf
> 
> [channels]
> signalling=fxs_ks
> language=en
> context=default
> channel => 1
> 
> And this is the content of the zaptel.conf which seems to be ok since
I
> run /sbin/ztcfg and it executes with no errors...
> 
> fxsks=1
> loadzone=es
> defaultzone=us
> 
> 
> Thanks for your reply,
> 
> RODOLFO
> 
> David J Carter wrote:
> 
> >Rodolfo,
> >
> >Shouldn't it be siganlling=fxs_ls for the x100p ?
> >Where is your channel => 1
> >
> >What is in your zaptel.conf ?
> >
> >Dave
> >
> >-----Original Message-----
> >From: asterisk-users-bounces at lists.digium.com
> >[mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Rodolfo
> >Grave
> >Sent: 15 September 2004 22:52
> >To: Asterisk Users Mailing List - Non-Commercial Discussion
> >Subject: [Asterisk-Users] Asterisk is not "picking up the phone" with
> >ax100p card
> >
> >
> >Hi.
> >
> >I have a x100p card installed on my asterisk box... my zapata.conf
file
> >includes the following lines:
> >
> >[channels]
> >context=default
> >switchtype=national
> >signalling=fxo_ls
> >rxwink=300
> >echocancel=yes
> >rxgain=0.0
> >txgain=0.0
> >group=1
> >callgroup=1
> >pickupgroup=1
> >
> >
> >Basically, the zapata.conf file generated by make samples.
> >
> >Then in my extensions.conf I have this:
> >
> >[default]
> >include => demo
> >
> >And demo is also the included in the sample extensions.conf
> >
> >Now, when I call into my PSTN line connected to the x100p card (which
> >also has a phone attached just to hear the ringing), asterisk is not
> >answering the call. I expected it to go into the [default] context,
> >which should make a welcome speech.
> >
> >I am able to call asterisk from the console and everything goes ok.
This
> >is also the lsmod report concerning wcfxo and zaptel when asterisk is
> >not running:
> >
> >wcfxo                   8704   0  (unused)
> >zaptel                188416   0  [wcfxo]
> >
> >and this is when asterisk is running:
> >
> >wcfxo                   8704   0  (unused)
> >zaptel                188416   4  [wcfxo]
> >
> >so I assume zaptel is being used by asterisk as expected.
> >
> >Any hints on why asterisk doens't get the call?
> >
> >Thanks in advance.
> >
> >RODOLFO
> >
> >
> >---
> >avast! Antivirus: Outbound message clean.
> >Virus Database (VPS): 0438-1, 14/09/2004
> >Tested on: 15/09/2004 23:51:53
> >avast! - copyright (c) 2000-2004 ALWIL Software.
> >http://www.avast.com
> >
> >
> >
> >_______________________________________________
> >Asterisk-Users mailing list
> >Asterisk-Users at lists.digium.com
> >http://lists.digium.com/mailman/listinfo/asterisk-users
> >To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >_______________________________________________
> >Asterisk-Users mailing list
> >Asterisk-Users at lists.digium.com
> >http://lists.digium.com/mailman/listinfo/asterisk-users
> >To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> >---
> >avast! Antivirus: Inbound message clean.
> >Virus Database (VPS): 0438-1, 14/09/2004
> >Tested on: 16/09/2004 0:13:20
> >avast! - copyright (c) 2000-2004 ALWIL Software.
> >http://www.avast.com
> >
> >
> >
> >
> >
> >
> 
> 
> 
> ---
> avast! Antivirus: Outbound message clean.
> Virus Database (VPS): 0438-1, 14/09/2004
> Tested on: 16/09/2004 0:39:28
> avast! - copyright (c) 2000-2004 ALWIL Software.
> http://www.avast.com
> 
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users




More information about the asterisk-users mailing list