[Asterisk-Users] Grandstream Budgetone 100 Caller ID shows extension, not incoming Caller ID

[Steven P. Donegan]

Firmware now current (1.0.5.11) - no change in what is displayed on the 
phone. Good thought though :-)

Steve Maroney wrote:

>Try upgrading the firmware
>
>Thank you,
>Steve Maroney
>
>On Sun, 12 Sep 2004, Steven P. Donegan wrote:
>
>  
>
>>Eric Wieling wrote:
>>
>>    
>>
>>>On Sun, 2004-09-12 at 09:41, Duane wrote:
>>>
>>>
>>>      
>>>
>>>>Steven P. Donegan wrote:
>>>>
>>>>
>>>>
>>>>        
>>>>
>>>>>I've looked through the archives - and see questions similar to mine,
>>>>>but no answers. What, if anything, can be done to get the incoming
>>>>>Caller ID to be presented on the Budgetone's Caller ID display? In all
>>>>>other respects the phone+Asterisk seem to be extremely happy with each
>>>>>other.
>>>>>
>>>>>
>>>>>          
>>>>>
>>>>What you need to do is strip the alpha caller name from the caller ID,
>>>>the 101's can only handle numbers and it's trying to display a name...
>>>>
>>>>
>>>>        
>>>>
>>>I don't think this is the problem. If it was a general problem hundreds
>>>f people would be complaining about this. Put a
>>>NoOp(CALLERID=${CALLERID}) in the dialplan just before the Dial line to
>>>ring the GS phone.  What you should see is something like CALLERID=Bob
>>>Dobbs <666> on the console when the NoOp runs.  If you see ANYTHING that
>>>isn't in the format of Caller*ID Name <calleridnumber. then you have
>>>something messed up in your Asterisk config.  As said, the BT101 only
>>>can display Caller*ID numbers, it should generally just throw out the
>>>Caller*ID name.  You don't mention what COUNTRY you are in so I don't
>>>know if it's an issue between what your telco sends and what Asterisk
>>>expects.  In the USA this is not an issue, in other countries it *could*
>>>be an issue.
>>>
>>>
>>>
>>>      
>>>
>>I am in the US, and caller ID otherwise works fine (ie on analog
>>stations it comes thorough just fine).
>>
>>sip.conf configlet:
>>
>>[1000]
>>type=friend
>>username=1000
>>fromuser=1000
>>callerid=Computer Room <1000>
>>host=dynamic
>>nat=no
>>canreinvite=yes
>>dtmfmode=info
>>mailbox=1000 at default
>>disallow=all
>>allow=ulaw
>>
>>extensions.conf configlet:
>>
>>[sip-access]
>>
>>exten => 1000,1,Macro(stdexten,1000,SIP/1000)
>>
>>The stdexten Macro is the vanilla one from 'stock' Asterisk.
>>
>>On the console I see all the appropriate caller ID/connection info, and
>>the Voicemail application definitely emails me the correct stuff - so it
>>seems it is something being lost between Asterisk/Grandstream...
>>
>>Thanks for any help - this is on my home PBX - but once it all works I
>>will be rolling it out as a test at a friendly beta customer :-)
>>
>>_______________________________________________
>>Asterisk-Users mailing list
>>Asterisk-Users at lists.digium.com
>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>    
>>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>  
>