[Asterisk-Users] Problems installing x100p

John Hill jhill at noach.com
Sun Sep 12 05:02:29 MST 2004


Make sure you have the bios updated to recognise the card. If the hardware 
does not see it the OS wont either.
I just built Asterisk on an old single 450 PII Compaq Prolient 800 with an 
x100p and 3 ata186's. It works just fine.
Hope this helps.

--john

----- Original Message ----- 
From: "Rodolfo Grave" <rodolfograve at yahoo.es>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>
Sent: Sunday, September 12, 2004 6:50 AM
Subject: [Asterisk-Users] Problems installing x100p


> Hi.
>
> I have succesfuly installed asterisk and after I added a x100p card, but 
> the system doesn't seem to know the card is there. This is what I've done:
>
> compiled and installed zaptel, libpri and asterisk in that order using 
> "make clean ; make install" commands. also, "make samples" for asterisk.
>
> shutdown the PC and installed the x100p PCI card.
>
> execute the following commands (I also include the output):
>
> linux# ] modprobe zaptel
> linux# ] modprobe wcfxs
> /lib/modules/2.4.21-99-default/misc/wcfxs.o: init_module: No such device
> /lib/modules/2.4.21-99-default/misc/wcfxs.o: insmod 
> /lib/modules/2.4.21-99-default/misc/wcfxs.o failed
> /lib/modules/2.4.21-99-default/misc/wcfxs.o: insmod wcfxs failed
> Hint: insmod errors can be caused by incorrect module parameters, 
> including invalid IO or IRQ parameters.
>      You may find more information in syslog or the output from dmesg
> linux# ] lspci
> 00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo 
> PRO133x] (rev 22)
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo 
> MVP3/Pro133x AGP]
> 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile South] 
> (rev 09)
> 00:07.1 IDE interface: VIA Technologies, Inc. 
> VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
> 00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 02)
> 00:07.3 Host bridge: VIA Technologies, Inc. VT82C596 Power Management
> 00:0a.0 Ethernet controller: MYSON Technology Inc SURECOM EP-320X-S 
> 100/10M Ethernet PCI Adapter
> 00:0c.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 
> 10)
> 00:0c.1 Communication controller: C-Media Electronics Inc CM8738 (rev 10)
> 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 86C326 
> 5598/6326 (rev 0b)
>
> It seems that the PCI card is not detected... any ideas?
>
> Thanks in advance.
>
> RODOLFO
>
>
>
>
> ---
> avast! Antivirus: Outbound message clean.
> Virus Database (VPS): 0437-1, 09/09/2004
> Tested on: 12/09/2004 13:50:10
> avast! - copyright (c) 2000-2004 ALWIL Software.
> http://www.avast.com
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users 




More information about the asterisk-users mailing list