[Asterisk-Users] DevKit TDM400P module won't load

Lyle Giese lyle at lcrcomputer.net
Thu Sep 9 19:18:07 MST 2004


Just to be clear, wcfxo is for the X10xP cards.  And wcfxs is for the TDM
card irregardless of whether it has FXO or FXS modules.

However I still think you have a problem as you don't have any card
identified as  communication controller: Tiger Jet networks in your
/dev/proc.  You should have that before loading either zaptel or wcfxs.

Lyle

----- Original Message ----- 
From: "Colin Haxton" <Colin at arena.co.nz>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Thursday, September 09, 2004 8:16 PM
Subject: Re: [Asterisk-Users] DevKit TDM400P module won't load


> Hi Lyle,
>
> I don't have lspci on my system.  It's a dump of what is in the
> /proc/pci anyway.
>
> Yep, zaptel loads fine.  The X100P loads and is working well, with
> Asterisk.  It's actually in another machine, I moved this TDM400p to a
> machine that I can play around on.
>
> I haven't loaded wcfxo as that's on the X100P and I don't have a FXO on
> this card.  Only one FXS.
>
> lsmod says
> wcfxs                  38432  0
> zaptel                189188  1 wcfxs
> crc_ccitt               2560  1 zaptel
> But dmesg reports these errors.
>
> Any other ideas?  :)
>
>
> Colin
>
> Lyle Giese wrote:
> >
> > What does lspci -v show?  I just looked at my /proc/dev and it shows two
> > Communication Controller: Tiger Jet Network Inc in there.  I have a
TDM22b
> > and a X100P on a 2.4.x kernel.
> >
> > Did you modprobe zaptel first?  Then wcfxs and then wcfxo?
> >
> > Lyle
> >
> > ----- Original Message -----
> > From: "Colin Haxton" <Colin at arena.co.nz>
> > To: <asterisk-users at lists.digium.com>
> > Sent: Thursday, September 09, 2004 7:57 PM
> > Subject: [Asterisk-Users] DevKit TDM400P module won't load
> >
> > > Hi all,
> > >
> > > I have just purchased the DevKit from Digium and received a X100P and
a
> > > TDM400P (it has one FXS module).
> > >
> > > The problem is that I can't get the kernel module (wcfxs) to load and
> > > run.  I have searched the archives and can't find anything about this.
> > > Do the messages below ring any bells with anyone ?
> > >
> > > There is no interrupt clash (see pci list below).  I am running on a
AMD
> > > 1.2G processor, 2.6 kernel.  The motherboard is a MSI K7T Turbo2,
which
> > > is PCI 2.2, I flash upgraded the bios to the latest version just in
> > > case.
> > >
> > > Can anyone help?  I am at a loss what to try next and I don't want to
> > > end up throwing away my new toy.  :)
> > >
> > > Thanks,
> > >
> > > Colin
> > >
> > > /--dmesg-------------------------------------------------
> > > zaptel: no version for "struct_module" found: kernel tainted.
> > > Zapata Telephony Interface Registered on major 196
> > > ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 17 (level, low) -> IRQ 17
> > > Freshmaker version: 71
> > > 00 != ff
> > > 01 != ff
> > > 02 != ff
> > > 03 != ff
> > > 04 != ff
> > > 05 != ff
> > > <snip>
> > > f2 != ff
> > > f3 != ff
> > > f4 != ff
> > > f5 != ff
> > > f6 != ff
> > > f7 != ff
> > > f8 != ff
> > > f9 != ff
> > > fa != ff
> > > fb != ff
> > > fc != ff
> > > fd != ff
> > > fe != ff
> > > Freshmaker failed register test
> > > wcfxs: probe of 0000:00:08.0 failed with error -5
> > > ----------------------------------------------------/
> > >
> > > /---proc/pci-----------------------------------------
> > > PCI devices found:
> > >   Bus  0, device   0, function  0:
> > >     Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev
> > > 3).
> > >       Master Capable.  Latency=8.
> > >       Prefetchable 32 bit memory at 0xe0000000 [0xe3ffffff].
> > >   Bus  0, device   1, function  0:
> > >     PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
> > > (rev 0).
> > >       Master Capable.  No bursts.  Min Gnt=12.
> > >   Bus  0, device   7, function  0:
> > >     ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
> > > (rev 64).
> > >   Bus  0, device   7, function  1:
> > >     IDE interface: VIA Technologies, Inc.
> > > VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 6).
> > >       Master Capable.  Latency=32.
> > >       I/O at 0xd000 [0xd00f].
> > >   Bus  0, device   7, function  2:
> > >     USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> > > Controller (rev 26).
> > >       IRQ 11.
> > >       Master Capable.  Latency=32.
> > >       I/O at 0xd400 [0xd41f].
> > >   Bus  0, device   7, function  3:
> > >     USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> > > Controller (#2) (rev 26).
> > >       IRQ 11.
> > >       Master Capable.  Latency=32.
> > >       I/O at 0xd800 [0xd81f].
> > >   Bus  0, device   7, function  4:
> > >     Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
> > > (rev 64).
> > >       IRQ 7.
> > >   Bus  0, device   8, function  0:
> > >     Network controller: Individual Computers - Jens Schoenfeld Intel
537
> > > (rev 0).
> > >       IRQ 17.
> > >       Master Capable.  Latency=32.  Min Gnt=1.Max Lat=128.
> > >       I/O at 0xdc00 [0xdcff].
> > >       Non-prefetchable 32 bit memory at 0xe4000000 [0xe4000fff].
> > >   Bus  0, device  13, function  0:
> > >     Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone]
> > > (rev 36).
> > >       IRQ 18.
> > >       Master Capable.  Latency=32.  Min Gnt=10.Max Lat=10.
> > >       I/O at 0xe000 [0xe07f].
> > >       Non-prefetchable 32 bit memory at 0xe8001000 [0xe800107f].
> > >   Bus  1, device   0, function  0:
> > >     VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX
> > > 440-SE] (rev 163).
> > >       IRQ 16.
> > >       Master Capable.  Latency=32.  Min Gnt=5.Max Lat=1.
> > >       Non-prefetchable 32 bit memory at 0xe5000000 [0xe5ffffff].
> > >       Prefetchable 32 bit memory at 0xd0000000 [0xd7ffffff].
> > >       Prefetchable 32 bit memory at 0xd8000000 [0xd807ffff].
> >
> --------------------------------------------------------------------------
> > -/
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> -- 
> ------------------------
> Colin Haxton
> Arena Consulting Limited
> www.arena.co.nz
>
> Office: (0800) 371-371
> Int'l: +64 4 528-6250
> Mobile-NZ: 021 858-002
> Mobile-AUS: 0405 282-786
> ========================
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>




More information about the asterisk-users mailing list