[Asterisk-Users] Wildcards and variable number of digits

Eric Jacksch jacksch at tenebris.ca
Sun Sep 5 18:03:03 MST 2004 

I don't think so, but I'm very new to Asterisk - is there an easy way to
check?


On 2004-09-05 20:56, "Craig Guy" <cguy at bigpond.net.au> wrote:

> Do you have early dial enabled at all?
> 
> Craig 
> 
> ----- Original Message -----
> From: "Eric Jacksch" <jacksch at tenebris.ca>
> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> <asterisk-users at lists.digium.com>
> Sent: Monday, September 06, 2004 5:16 AM
> Subject: RE: [Asterisk-Users] Wildcards and variable number of digits
> 
> 
> Here are the snippets...I changed things to "9" just in case...
> 
> No matter what I do, I get to dial 9 plus two more digits...
> 
> 
> [internal] 
> ;include => extensions
> ;include => tovpc
> include => tofwd 
> ; this should just dial myself
> exten => _999XXX,1,Dial,${P1}
> 
> .... 
> 
> [macro-dialwfd] 
> exten => s,1,SetCallerID(${FWDCIDNAME})
> exten => 
> s,2,Dial(IAX2/${FWDNUMBER}:${FWDPASSWORD}@iax2.fwdnet.net/${ARG1},${ARG2},r)
> exten => s,3,Hangup
> 
> ; Prefix 9 to dial out to Free World Dial
> [tofwd] 
> ; when I do this, it gives me a ring (and then busy) as soon as I
> ; dial the second digit
> exten => _9X.,1,Macro(dialwfd,${EXTEN:1},60)
> 
> 
> 
> -----Original Message-----
> From: Brian West [mailto:brian at bkw.org]
> Sent: Sun 2004-09-05 15:55
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Cc: 
> Subject: RE: [Asterisk-Users] Wildcards and variable number of digits
> Actually it does the proper usage of the "." char in your dial plan should
> solve this problem.  It's not the channel driver that's doing this its
> asterisk.  You need to sandbox a wildcard into its own context then include
> it.  Otherwise it wins NO MATER WHAT.  This way an extension defined within
> the current context wins over the included wildcard context.
> S= 
> bkw 
> 
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
>> bounces at lists.digium.com] On Behalf Of Eric Jacksch
>> Sent: Sunday, September 05, 2004 2:50 PM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [Asterisk-Users] Wildcards and variable number of digits
>> 
>> Not sure I understand..does that help my problem of not being able to
>> enter 
>> sufficient digits, or is that a consideration once I get a driver that
>> allows me to # terminate the dialing string?
>> 
>> 
>> On 2004-09-05 15:00, "Brian West" <brian at bkw.org> wrote:
>> 
>>> Just to clarify the usage of the . wildcard in your dialplan.
>>> 
>>> Here is the proper usage of this feature which seems to not be
>> documented 
>>> ANYWHERE very well.
>>> 
>>> [default] 
>>> include => other
>>> exten => _712XXX,1,NoOp,Blah
>>> 
>>> [other] 
>>> exten => _7.,1,NoOp,somethingelse
>>> 
>>> 
>>> The extensions in the current context win over an include.. only if
>>> something doesn't specifically match in [default] but does as a wildcard
>> as 
>>> an include then it will work.  Remember includes are your friend.
>>> 
>>> bkw 
>>> 
>>> 
>>>> -----Original Message-----
>>>> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
>>>> bounces at lists.digium.com] On Behalf Of Karl Brose
>>>> Sent: Sunday, September 05, 2004 1:50 PM
>>>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>>>> Subject: Re: [Asterisk-Users] Wildcards and variable number of digits
>>>> 
>>>> 
>>>> The problem you are having is due to the way chan_phone was designed.
>>>> The distributed driver does not buffer the entire phone number dialed
>>>> and then send it on to the PBX,
>>>> like a SIP phone would, but instead scans the dial plan after every
>>>> digit is entered to look for a match.
>>>> The solution is to only use fixed length extension patterns, but at the
>>>> same time requires different dial plans
>>>> for the Phone/phoneX devices.  I you're only dialing PSTN numbers it's
>>>> not so bad, but many VOIP providers
>>>> have all kinds of numbering plans. On the other hand, fixed patterns
>> are 
>>>> nice since you don't have to
>>>> press any "call" or "dial" buttons to make the call.
>>>> 
>>>> I have a new chan_phone driver which solves this issue by buffering the
>>>> dial string until the user presses
>>>> the pound (#) key to send the phone number to the pbx.  The features
>> can 
>>>> be toggled on/off any time by dialing
>>>> *1#  or  *0#  or in the config file with a mode "buffered"  which is
>>>> otherwise the same as "dialtone"
>>>> 
>>>> 
>>>> 
>>>> 
>>>> Eric Jacksch wrote:
>>>> 
>>>>> Greetings, 
>>>>> 
>>>>> I'm having a miserable time getting Asterisk working with FWD.  All
>> the 
>>>>> samples show something like...
>>>>> 
>>>>> exten => _7., ....
>>>>> 
>>>>> How do I get Asterisk to wait until the user is finished dialing
>> instead 
>>>> of 
>>>>> trying as soon as it gets the second digit?
>>>>> 
>>>>> I can use _7XXX, and dial the FWD 3-digit test numbers fine, but I'd
>> like 
>>>> to 
>>>>> be able to dial others...
>>>>> 
>>>>> Same problem for outside analog line...how do I convince Asterisk to
>> send 
>>>>> anything that starts with a "9" to it?
>>>>> 
>>>>> If it makes a difference, I'm playing with some QuickNet cards to
>> learn 
>>>> the 
>>>>> system...then I'll likely buy some other cards with higher capacity.
>>>>> 
>>>>> Thanks, 
>>>>> Eric 
>>>>> 
>>>>> 
>>>>> ----------------------------------------------------------------------
>> -- 
>>>>> 
>>>>> _______________________________________________
>>>>> Asterisk-Users mailing list
>>>>> Asterisk-Users at lists.digium.com
>>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>> To UNSUBSCRIBE or update options visit:
>>>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>> 
>>>>> 
>>>> _______________________________________________
>>>> Asterisk-Users mailing list
>>>> Asterisk-Users at lists.digium.com
>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>> To UNSUBSCRIBE or update options visit:
>>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>> 
>>> _______________________________________________
>>> Asterisk-Users mailing list
>>> Asterisk-Users at lists.digium.com
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>> To UNSUBSCRIBE or update options visit:
>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>> 
>> -- 
>> Eric Jacksch, CISSP, CISM
>> Tenebris Technologies Inc.
>> http://www.tenebris.ca
>> +1 613 860-0964 
>> jacksch at tenebris.ca
>> 
>> Information security consulting, investigations, and forensics.
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

-- 
Eric Jacksch, CISSP, CISM
Tenebris Technologies Inc.
http://www.tenebris.ca
+1 613 860-0964
jacksch at tenebris.ca

Information security consulting, investigations, and forensics.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 2802 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20040905/b2e51db9/smime.bin

More information about the asterisk-users mailing list