[Asterisk-Users] Digits being lost going out POTS line?

[Lyle Giese]

If the call goes through, is voice quality good and free of pops and clicks?
(esp for the receiving party)

I had a problem with a TDM card and moving it to a different slot cleared
the clicks and pops and distortions and was having the same problem dialing
out.   I had figured out that both were related and once one was fixed so
was the other.

Lyle

----- Original Message ----- 
From: "Ken D'Ambrosio" <ken at jots.org>
To: <asterisk-users at lists.digium.com>
Sent: Tuesday, October 26, 2004 8:20 PM
Subject: [Asterisk-Users] Digits being lost going out POTS line?


> When I dial out, from both my analog and my SIP phones, it fails roughly
> 80% of the time with various telco messages (eg., "The number you have
> dialed...").  The messages take a good 30 seconds before I hear them,
> which makes me think the telco isn't seeing enough digits.  20% of the
> time, my calls go right through.  Any ideas?
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>