[Asterisk-Users] polycom IP 500/600

[Richard]

Hi Kristian,

I'd like to use ftp because of several advantages it has. For example,
ability to change the time stamp and reload the phone. But the default
password is a big issue. I'd like to change it but don't want to go to each
phone and reset it. Any way to change it?

Thanks,


> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of Kristian Kielhofner
> Sent: Tuesday, October 26, 2004 11:34 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] polycom IP 500/600
> 
> Richard wrote:
> 
> > Hi,
> >
> > A few questions about polycom IP 500/600.
> >
> > . how do I reset everything to factory default? The combination of
> > 4,6,8,* seems only reset the network setup. Other settings, e.g. time
> > server, SIP configure are still there.
> >
> > . is a way to push ftp username/password via dhcp? I'd like to change
> > the default username and password, but don't want to manually set each
> > phone.
> >
> > Thanks,
> >
> >
> 
> Richard,
> 
> 	Use DHCP to assign a TFTP server (isc-dhcpd: "next server" or maybe
> "next-server" option).  Put configs for your phones on that tftp server.
>   The wiki has a link to this:
> 
> http://www.voip-info.org/tiki-index.php?page=Polycom+Phones
> 
> http://www.freedomphones.net/polycom/files/
> 
> --
> Kristian Kielhofner
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users