[Asterisk-Users] H323.conf question

[Steve Totaro]

i would just lose the line where it says "context=default323"


Thanks,
Steve Totaro
stotaro at totarotechnologies.com
www.totarotechnologies.com


----- Original Message ----- 
From: <niels at wxn.nl>
To: <asterisk-users at lists.digium.com>
Sent: Tuesday, October 26, 2004 5:52 AM
Subject: [Asterisk-Users] H323.conf question


Hello

I have chan_h323.so compiled.. And got is up and running 
I can place calls now from my cisco AS5350 to asterisk and back 

Only.. 

In h323.conf it doesn't seem to 'see' the my user .. It's just always
using the default context 

If I dial from 192.168.1.50 (my cisco) to 192.168.1.100 (my asterisk) it
uses the default context (defaulth323) .. No matter what I do in the
[testuser] part.. I want it to use the h323dialout context if call is
coming in from 192.168.1.50 .. But it just doesn't seem to work 


Below my h323.conf

What am I doing wrong?



; Open H.323 driver configuration
[general]
port = 1720
bindaddr = 192.168.1.100
disallow=all
allow=gsm               ; Always allow GSM, it's cool :)
gatekeeper = DISABLE


; Default context gets used in siutations where you are using
; the GK routed model or no type=user was found. 
context=defaulth323<<<<<<<-RIGHT HERE

[testuser]
type=user
host=192.168.1.50
context=h323dialout
incominglimit=4
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users