[Asterisk-Users] Transfering Calls

steve szmidt steve at szmidt.org
Mon Oct 25 14:14:43 MST 2004


On Monday 25 October 2004 04:43 pm, josh at mail.so-sys.com wrote:
> I have tried that on the GrandStream Budgetone phones and the transfer
> does not work on them.
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Eric
> Wieling
> Sent: Monday, October 25, 2004 2:14 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] Transfering Calls
>
> Brian J. Rathman wrote:
> > I am having several users complain about not being able to use the #
>
> button when dialing into IVR's, etc, because the # key prompts for
> transfering the call to another extension. Is there a way to still
> provide transfer capability, but not use the # key? I am using SNOM 200
> phones so if anyone has any suggestions, I would greatly appreciate it.
>
> The t and T options to Dial() provide # transfers.  Use the transfer
> function of your SIP phone and don't use # transfers.

I think the problem is the version of firmware. I used to be able to transfer 
fine but now I can't. On the other hand a lag I used to have is now gone. My 
V is 3.52. Using the hard Transfer button don't work, but using the 
softbutton does.

-- 

Steve Szmidt

"They that would give up essential liberty for temporary safety 
deserve neither liberty nor safety."
                                Benjamin Franklin



More information about the asterisk-users mailing list