[Asterisk-Users] Call Waiting

[Henry Devito]

If this is call waiting on the CO line, I found to flash the CO line you
have to (flash *0) to answer it.  If it is another station calling your
phone while you are on , a normal flash will do. 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Nikhil Jogia
Sent: Sunday, October 24, 2004 6:54 AM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Call Waiting

>Hi,
>
>I have just set up an Asterisk box.....it sure is a big job to get
>everything perfect, especially when you have picky users.
>
>Anyway, the box has 2 X100P's and a couple of sipura spa-2000's
>connected to the LAN.

>1 of the lines connected to the X100P's goes straight to extension 1000
>after a short greeting.

>Anyway, say ext 1000 is talking to ext 1001, and the line rings. Ext
>1000 hears a small beep every few seconds. This is obviously call
>waiting.

>My question is how do I answer that incoming call whilst on a call? I
>have looked around, tried *0 and even 0*, the flash key, but to no avail
>:(

If this is call waiting on the CO line, I found to flash the CO line you
have to (flash *0) to answer it.  If it is another station calling your
phone while you are on , a normal flash will do. 


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users