[Asterisk-Users] Hardware Recommendations

[Jay Milk]

Yes, this is plenty more than you need -- if you have the X100P, you
won't need to worry about an alternate timing source.  My system is
running on a 1300MHz (?) Duron with 256MB Ram and a 10GB drive, and it
handles one POTS, a handful of VOIP trunks and a dozen extensions fine.

> -----Original Message-----
> From: David Ishmael [mailto:dishmael at windwardcg.com] 
> Sent: Friday, October 22, 2004 9:35 AM
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Subject: RE: [Asterisk-Users] Hardware Recommendations
> 
> 
> Ok, so the rest looks good too?  I need one X100P (PSTN 
> connection) and one IAXy (analog phones)?
> 
> -Dave
> 
> -----Original Message-----
> From: Yair Hakak [mailto:yhakak at gmail.com] 
> Sent: Friday, October 22, 2004 10:27 AM
> To: dishmael at windwardcg.com; Asterisk Users Mailing List - 
> Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] Hardware Recommendations
> 
> if by "digital phone" you mean IP phone like a grandstream or 
> a snom, then yes, you don't need any additional hardware to 
> connect to * (except an rj45 cable, of course.) -yair
> 
> 
> On Fri, 22 Oct 2004 10:19:18 -0400, David Ishmael 
> <dishmael at windwardcg.com> wrote:
> > 
> > 
> > 
> > I'm sure this has been asked more times than anyone cares to count, 
> > but I want to make sure I get the right stuff. I'm 
> installing Asterisk 
> > at home solely to play with and learn VoIP (plus it sounds 
> pretty cool 
> > so it has that going for it too). Eventually all my phones (~4 of 
> > them) will go through my Asterisk system. I've ordered my server 
> > hardware, here's what I've got:
> > 
> > Trinity GC-SL
> > Intel 2.66 533MHz 
> > 512MB PC2100 ECC 
> > WD 160GB IDE 
> > 
> > And some minor stuff (cdrom, floppy, etc.). Since this is 
> strictly an 
> > educational platform for one person, I would think that's more than 
> > enough to handle my small number of calls. So I'm comfortable with 
> > that
> much...it's
> > the Digium hardware I'm struggling with. What I'd like to do is 
> > connect
> the
> > Asterisk PBX to my PSTN phone line so I think I need an 
> X100P so I can
> make
> > and take external PSTN calls, correct?
> > 
> > I don't own a digital phone yet, so I think I also need to get at 
> > least
> one
> > IAXy module for one of my analog phones (I'm still trying to figure 
> > out
> what
> > kind of digital phone to get, recommendations are welcomed 
> there too). 
> > I assume that any digital phone I get can talk to the PBX over 
> > Ethernet so I shouldn't need additional cards for that. Am 
> I way off 
> > base on any of this or am I going in the right direction?
> > 
> >  
> > 
> > Thanks,
> > 
> > Dave
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com 
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> > 
> >
> 
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com 
> http://lists.digium.com/mailman/listinfo/aster> isk-users
> To 
> UNSUBSCRIBE or update options visit:
>    
http://lists.digium.com/mailman/listinfo/asterisk-users