[Asterisk-Users] Control access to external dialing

[David J Carter]

Luke,

I have a situation like yours, mine is to enable an IAX2 call between two
servers and then break out to a trunk. All I have done is added a six digit
code in front of the number (eg Birthdate ,210573 or 052173 if in US), and
then stripted the six digits before dialing. You only tell the people you
want to be able to dial out the six digit code.

Regards

Dave

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Luke
Catranis
Sent: 20 October 2004 15:55
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [Asterisk-Users] Control access to external dialing


Wondering if anyone could give me a tip on controlling access under the
following scenario.

I have an ATA connected to a legacy pbx as a trunk line. I want to
control who can make calls on this trunk. I cannot set restrictions on
the users via the pbx, so I would like to be able to assign a passcode
for people so they can dial out using this trunk line...





_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users