[Asterisk-Users] SNOM 190 "Dial-Plan String" Settings

Mon Oct 18 02:50:44 MST 2004

Or better (to avoid loops) leave the [sip] context intact (like you had 
originally) and change in sip.conf your context to 'from-sip', and add in 
your extensions.conf:

[from-sip]
include => internal

Regards,
Joris

----- Original Message ----- 
From: "Joris Trooster / Interstroom" <trooster at interstroom.nl>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>
Sent: Monday, October 18, 2004 11:29 AM
Subject: Re: [Asterisk-Users] SNOM 190 "Dial-Plan String" Settings


> Hello James.
>
> You have "context = sip" in your sip.conf, but you do not have any 
> dialplan
> for outgoing calls in that context.
>
> Add to the [sip] context:
> include => outgoing
>
> Regards,
> Joris
>
>
> ----- Original Message ----- 
> From: "James Bean" <james at hdcs.com.au>
> To: <trooster at interstroom.nl>
> Sent: Monday, October 18, 2004 11:13 AM
> Subject: FW: [Asterisk-Users] SNOM 190 "Dial-Plan String" Settings
>
>
>
> I don't have any soft phones setup, the SNOM receives the calls no 
> problems
> when the SNOM tries to dial out it says "Not Found:" on the phone display,
> on the asterisk console with "asterisk -vvvvvgc" when I try to dialout I
> only get
>
> chan_sip.c:7561 handle_request: Unknown SIP command 'PUBLISH' from
> '192.168.69.250'
>
> Which I am told is normal as asterisk doesn't support the Publish
> command....
>
> I have an analog phone plugged into the TDM400P in another port and it 
> dials
> out without issue.
>
> Thanks for the response this has been bugging the crap out of me, any help
> would be appreciated.
>
> My /etc/extensions.conf is as follows.
>
> [pstn]
>
> exten => s,1,Wait(2)
> exten => s,2,NoOp(Comment Only: Call from ${CALLERIDNUM}) ; Just put a
> comment in the CLI for info.
> exten => s,3,Dial(SIP/snom-james,45,t)  ;Dial James SNOM Phone for 
> incoming
> calls exten => s,4,Hangup
>
> [internal]
>
> exten => i,1,Playback(invalid)
> exten => i,2,Hangup
> exten => t,1,Hangup
>
> exten => 099,1,Echo     ;simple echo test when you dial 099 on your phone
>
> include => outgoing
> include => voip
> include => sip
>
> [outgoing]
>
> exten => _9X.,1,Dial(Zap/g1/${EXTEN:1})
> exten => _9X.,2,Congestion()
> exten => _9X.,3,Hangup
>
> [voip]
>
> exten => _1XX,1,Dial(OH323/${EXTEN}@192.168.254.250/${CALLERIDNUM})     ;
> 1xx extension to Salisbury
> exten => _2XX,1,Dial(OH323/${EXTEN}@192.168.20.250/${CALLERIDNUM})      ;
> 2xx extension to Marcoola
> exten => 610,1,Dial(OH323/${EXTEN}@192.168.30.250/${CALLERIDNUM})  ; 610 
> to
> Jindalee exten => 620,1,Dial(OH323/${EXTEN}@192.168.40.250/${CALLERIDNUM})
> ; 620 to Batteryhill
>
> [sip]
>
> exten => 690,1,Dial(SIP/snom-james,30,tr) exten => 690,2,voicemail2,u900
> exten => 690,102,voicemail2,b900
>
> exten => 691,1,Dial(SIP/bt-karen,30,tr)
> exten => 691,2,voicemail2,u901
> exten => 691,102,voicemail,b901
>
> My sip.conf is as follows
>
> [general]
> port = 5060
> bindaddr = 192.168.69.1
> context = sip
> disallow = gsm
> allow = alaw
> disallow = ulaw
> nat=disable
> srvlookup=no
> localnet=192.168.69.0/255.255.255.0
> subscribecontext = sip
>
> [snom-james]
> type=friend
> secret=<password deleted>
> host=dynamic
> callerid="James" <690>
> defaultip=192.168.69.250
> dtmfmode=rfc2833
> mailbox=900
>
> [bt-karen]
> type=friend
> secret=<password deleted>
> host=dynamic
> callerid="Karen" <691>
> defaultip=192.168.69.251
> dtmfmode=rfc2833
> mailbox=901
>
> ---------------------------------------
>
> Although when I first start asterisk up I always get this 1 error that I 
> am
> not sure about.
>
> chan_sip.c:681 retrans_pkt: Maximum retries exceeded on call
> 3d1b58ba507ed7ab2eb141f241b71efb at 192.168.69.1 for seqno 102 (Non-critical
> Request)
>
> James
>
>>Hello James,
>>
>>There is nothing special with the Snom phones. The empty dialplan
>>string is normal. You only have to specify the displayname, account,
>>password and registrar. I think you have a mistake in your
>>extensions.conf. Does it work with another (soft)phone?
>>
>>Regards,
>>Joris
>>
>>
>>
>>On Oct 15, 2004, at 1:51 PM, James Bean wrote:
>>
>>> I am having a problem with my new SNOM190 and my asterisk box.
>>>
>>> Incoming calls to the SNOM work perfectly, but when i dial-out I get
>>> a "Not Found: <number dialed>" on the SNOM display everytime I try,
>>> nothing shows up on the console of the asterisk box so its not even
>>> touching it.
>>>
>>> I have the latest 3.54 firmware on it and when I looked at the Line 1
>>> setup for my asterisk box I released that in the SNOM phone there is
>>> nothing in my "Dial-Plan String" I take it it matches this inside the
>>> phone to choose which line to use in the SNOM phone.
>>>
>>> Unfortunately I am not finding much on the format of the Dial-Plan
>>> String in the SNOM phones.
>>>
>>> All I need is for it to send all calls regardless of format to the
>>> asterisk box.
>>>
>>> Anyone got any suggestions.
>>>
>>> James
>>>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>