[Asterisk-Users] CreateLogicalChannel Unknow Data Type

[CHAUVELIN Samuel]

When i run asterisk with a H323 communication :


  0:40.519          H225 Answer:9734528 H323    CreateLogicalChannel -
forward channel
  0:40.520          H225 Answer:9734528 H323    Found capability:
G.711-ALaw-64k{hw} <1>
  0:40.521          H225 Answer:9734528 RTP     Found existing session 1
  0:40.522          H225 Answer:9734528 H323RTP Receiver created using session 1
  0:40.523          H225 Answer:9734528 LID     Created codec:
pt=PCMA, bytes=240, samples=8
  0:40.971          H225 Answer:9734528 LogChan Bandwidth
requested/used = 64.0/0.0 kb/s
  0:41.186          H225 Answer:9734528 H323    Bandwidth request:
-0.0kb/s, available: 192.0kb/s
  0:41.417          H225 Answer:9734528 H323    Bandwidth request:
+64.0kb/s, available: 192.0kb/s
  0:41.801          H225 Answer:9734528 H323RTP OnReceivedPDU for channel: R-101
  0:41.860          H225 Answer:9734528 RTP_UDP SetRemoteSocketInfo:
session=1 control channel, new=192.168.0.32:5005,
local=192.168.0.33:10000-10001, remote=192.168.0.32:5004-5005
  0:42.309          H225 Answer:9734528 H323    CreateLogicalChannel -
reverse channel
  0:42.537          H225 Answer:9734528 H323    CreateLogicalChannel -
unknown data type
  0:42.937          H225 Answer:9734528 H323    CreateLogicalChannel -
forward channel
  0:42.988          H225 Answer:9734528 H323    CreateLogicalChannel -
unknown data type
  0:43.212          H225 Answer:9734528 H323    CreateLogicalChannel -
reverse channel

I try codec in the same order withe the same number of frame but it
doesn't work.

Why this pb my Channel ?