[Asterisk-Users] Access Bank II

[Mason Herring]

It says FXS. How are you setting your switches? All the rear panel switches
are set to normal but I'm unsure of the front.

 

Thanks,

 

Mason Herring

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tim McKee
Sent: Sunday, October 10, 2004 8:35 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Access Bank II

 

might want to check you port card and be sure you have fsx ports rather than
fxo ports...   

 

I'm running a II with stock configs and having no problems.

 

tim mckee

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Mason Herring
Sent: Sunday, October 10, 2004 3:14 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Access Bank II

I show an active channel in zttool when taking a line off-hook but *
provides no dial tone. Any guesses?

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Mason Herring
Sent: Saturday, October 09, 2004 9:04 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Access Bank II

 

Here's the zaptel configs. Ztcfg shows no alarms. Thanks for the help!

 

Zaptel Configuration

======================

 

SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)

SPAN 2: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)

 

Channel map:

 

Channel 01: FXO Loopstart (Default) (Slaves: 01)

Channel 02: FXO Loopstart (Default) (Slaves: 02)

Channel 03: FXO Loopstart (Default) (Slaves: 03)

Channel 04: FXO Loopstart (Default) (Slaves: 04)

Channel 05: FXO Loopstart (Default) (Slaves: 05)

Channel 06: FXO Loopstart (Default) (Slaves: 06)

Channel 07: FXO Loopstart (Default) (Slaves: 07)

Channel 08: FXO Loopstart (Default) (Slaves: 08)

Channel 09: FXO Loopstart (Default) (Slaves: 09)

Channel 10: FXO Loopstart (Default) (Slaves: 10)

Channel 11: FXO Loopstart (Default) (Slaves: 11)

Channel 12: FXO Loopstart (Default) (Slaves: 12)

Channel 13: FXO Loopstart (Default) (Slaves: 13)

Channel 14: FXO Loopstart (Default) (Slaves: 14)

Channel 15: FXO Loopstart (Default) (Slaves: 15)

Channel 16: FXO Loopstart (Default) (Slaves: 16)

Channel 17: FXO Loopstart (Default) (Slaves: 17)

Channel 18: FXO Loopstart (Default) (Slaves: 18)

Channel 19: FXO Loopstart (Default) (Slaves: 19)

Channel 20: FXO Loopstart (Default) (Slaves: 20)

Channel 21: FXO Loopstart (Default) (Slaves: 21)

Channel 22: FXO Loopstart (Default) (Slaves: 22)

Channel 23: FXO Loopstart (Default) (Slaves: 23)

Channel 24: FXO Loopstart (Default) (Slaves: 24)

Channel 25: FXO Loopstart (Default) (Slaves: 25)

Channel 26: FXO Loopstart (Default) (Slaves: 26)

Channel 27: FXO Loopstart (Default) (Slaves: 27)

Channel 28: FXO Loopstart (Default) (Slaves: 28)

Channel 29: FXO Loopstart (Default) (Slaves: 29)

Channel 30: FXO Loopstart (Default) (Slaves: 30)

Channel 31: FXO Loopstart (Default) (Slaves: 31)

Channel 32: FXO Loopstart (Default) (Slaves: 32)

Channel 33: FXO Loopstart (Default) (Slaves: 33)

Channel 34: FXO Loopstart (Default) (Slaves: 34)

Channel 35: FXO Loopstart (Default) (Slaves: 35)

Channel 36: FXO Loopstart (Default) (Slaves: 36)

Channel 37: FXO Loopstart (Default) (Slaves: 37)

Channel 38: FXO Loopstart (Default) (Slaves: 38)

Channel 39: FXO Loopstart (Default) (Slaves: 39)

Channel 40: FXO Loopstart (Default) (Slaves: 40)

Channel 41: FXO Loopstart (Default) (Slaves: 41)

Channel 42: FXO Loopstart (Default) (Slaves: 42)

Channel 43: FXO Loopstart (Default) (Slaves: 43)

Channel 44: FXO Loopstart (Default) (Slaves: 44)

Channel 45: FXO Loopstart (Default) (Slaves: 45)

Channel 46: FXO Loopstart (Default) (Slaves: 46)

Channel 47: FXO Loopstart (Default) (Slaves: 47)

Channel 48: FXO Loopstart (Default) (Slaves: 48)

 

48 channels configured.

 

--zapata.conf--

 

[channels]

;

; Default language

;

;language=en

;

; Default context

;

context=default

signalling=fxo_ls

group=1

channel => 1-48

 

--/etc/zaptel.conf--

 

span=1,1,0,esf,b8zs

span=2,1,0,esf,b8zs

fxols=1-48

loadzone = us

defaultzone=us

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Henry Devito
Sent: Saturday, October 09, 2004 8:47 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Access Bank II

 

Can you post your config's please? At least the parts that pertain to your
question.  It may help to figure out if there is a problem.

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Mason Herring
Sent: Saturday, October 09, 2004 8:35 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Access Bank II

 

I have a CAC Access Bank II with 2 T1 and 48 analog ports and am using an
Asterisk server with 2 T100P cards. Both Access Bank and T100 cards have
green lights. Zaptel.conf and Zapata.conf are configured for fxo loop start
and I show 48 configured channels when doing ztcfg. When we take an analog
line from one of the 48 ports off-hook I show an active channel in zttool
but get no dial tone. Is there anyone with a similar setup that can help?

 

Thanks,

 

Mason Herring

Delta Signal LLC

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041011/78d1ebe4/attachment.htm