[Asterisk-Users] DID trunk suggestions for Asterisk

[Joe Cunnignham]

Correct here in the US it looks like using BRI for this maybe either be
impossible or a kluge based on some other posts I have read.

Joe


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Steve
Underwood
Sent: Sunday, October 10, 2004 10:44 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] DID trunk suggestions for Asterisk


Hi,

Technically you can do it, but whether you can get that as a service
depends on where you live. This may be what the original poster refered to.

Steve


harry gaillac wrote:

>hello,
>
>You can do DND over BRI !
>Harry
>
> --- Joe Cunningham <joe at cunninghamcentral.com> a
>écrit :
>
>
>>I have a client that has 4 analog DID trunks which
>>are wink start lines
>>and are the incoming lines.  Each  trunk line has 20
>>DIDs assigned.  We
>>are in the process of migrating them off their
>>current system to
>>Asterisk.   We need a way to get these DID trunks
>>into Asterisk so we
>>get the DID information to route the calls.  While
>>the DID setup self
>>is not the issue.  The issue is I am looking for an
>>inexpensive way to
>>get these trunks directly into the Asterisk box.
>>Since they are analog
>>DID we need to supply the voltage to the CO.  I have
>>looked at using
>>something like a BrookTrout card but these are
>>costly.   Also looked
>>using something like the DID-200 to convert the DID
>>trunk to loop-start
>>again these have a high cost.  I also considered
>>having the client order
>>and switch to PRI and all the advantages this brings
>>however I think
>>this might be overkill for this client. Not sure of
>>the month costs with
>>this I was thinking depending on the term this may
>>run about $500 per
>>month.  I also thought about BRI but searching
>>Google and such first it
>>looks like you can't do DID over BRI.
>>
>>So I guess my question is based on the above have I
>>missed something and
>>is there any inexpesive way to bring these DID
>>trunks right into
>>Asterisk keeping the current analog DID trunks?  If
>>so what hardware is
>>required?
>>
>>Cheers
>>Joe
>>
>>

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users