[Asterisk-Users] Modprobe zaptel fails: Unknown symbol crc_ccitt_table

[Jon Whitear]

I'm adding an X100P clone to my Asterisk box, and I'm having trouble with
the zaptel module. I'm running Gentoo linux with a vanilla 2.6.8.1 kernel
with devfs. I have emerged zapata, zaptel, libpri, and Asterisk (all version
1.0.0.) 

Zaptel compiles (with USE="devfs26") once I've corrected a syntax error in
/usr/include/linux/ixjuser.h (as per
http://lists.digium.com/pipermail/asterisk-users/2004-August/059263.html .) 

The trouble is, when I modprobe zaptel, I get:- 

server root # modprobe zaptel 
FATAL: Error inserting zaptel (/lib/modules/2.6.8.1/misc/zaptel.ko): Unknown
symbol in module, or unknown parameter (see dmesg) 
dmesg 
<snip> 
zaptel: Unknown symbol crc_ccitt_table 

I've had a look through the Gentoo bugzilla, but I'm not sure if the
combination of zaptel + 2.6 kernel + devfs is supported (yet.) I have asked
a question similar to this on the Gentoo forum, without response.  I guess
it's also possible that my X100P card is not compatible - here's what lspci
and cat /proc/pci have to say about it:

0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host
bridge (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
(rev 03)
0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
0000:00:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
0000:00:0b.0 Communication controller: Tiger Jet Network Inc. Tiger3XX
Modem/ISDN interface
0000:00:0c.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U
(rev 01)
0000:00:0d.0 Unknown mass storage controller: Silicon Image, Inc. (formerly
CMD Technology Inc) PCI0680 Ultra ATA-133 Host Controller (rev 02)
0000:00:0e.0 Ethernet controller: VIA Technologies, Inc. VT86C100A [Rhine]
(rev 06)
0000:01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP
(rev 04)

Bus  0, device  11, function  0:
  Communication controller: Individual Computers - Jens Schoenfeld Intel 537
(rev 0).
    IRQ 12.
    Master Capable.  Latency=32.  Min Gnt=1.Max Lat=128.
    I/O at 0xa400 [0xa4ff].
    Non-prefetchable 32 bit memory at 0xf1005000 [0xf1005fff].

Any help is greatly appreciated.

Cheers,


Jon