[Asterisk-Users] nufone config

[Steve Totaro]

My context in iax.conf is NANPA or some such.  Cannot look at it now.


----- Original Message ----- 
From: "Andrew Thompson" <asteriskuser at aktzero.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Saturday, October 09, 2004 1:22 PM
Subject: [Asterisk-Users] nufone config


> Can someone post or forward me the relevant sections of their nufone
> configs?
>
> I seem to be brainfarting on making it work. All my outbound attempts
> end up with results like this:
>
> bebop*CLI> iax2 debug
> IAX2 Debugging Enabled
> bebop*CLI> set verbose 9
> Verbosity was 0 and is now 9
>      -- Executing SetCallerID("SIP/710-1980", "9104108307") in new stack
>      -- Executing Dial("SIP/710-1980",
> "IAX2/andrewkt at nufone/19104108307") in new stack
>      -- Called andrewkt at nufone/19104108307
> Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 000 Type: IAX     Subclass: NEW
>     Timestamp: 00006ms  SCall: 00001  DCall: 00000 [198.22.67.70:4569]
>     VERSION         : 2
>     CALLED NUMBER   : 19104108307
>     CALLING NUMBER  : 9104108307
>     LANGUAGE        : en
>     USERNAME        : andrewkt
>     FORMAT          : 4
>     CAPABILITY      : 14
>     ADSICPE         : 2
>     DATE TIME       : 155805489
>
> Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 001 Type: IAX     Subclass:
> REJECT
>     Timestamp: 00016ms  SCall: 00170  DCall: 00001 [198.22.67.70:4569]
>     CAUSE           : No authority found
> bebop*CLI>
> Tx-Frame Retry[-01] -- OSeqno: 001 ISeqno: 001 Type: IAX     Subclass: ACK
>     Timestamp: 00016ms  SCall: 00001  DCall: 00170 [198.22.67.70:4569]
>      -- IAX2/nufone/1 is circuit-busy
>      -- Hungup 'IAX2/nufone/1'
>    == Everyone is busy/congested at this time
>      -- Executing Congestion("SIP/710-1980", "") in new stack
>    == Spawn extension (trusted, 19104108307, 3) exited non-zero on
> 'SIP/710-1980'
> bebop*CLI>
>
>
> I've tried several variations of friend/user/peer in iax.conf but
> haven't been able to make anything happen. My most recent config looks
> like this one, which is basically a duplicate of my voicepulse connect
> entry, which does work.
>
> register => andrewkt:mypass at nufone ; knock knock...
>
> [nufone]
> type=friend ; yes, i know friend is evil, it was a last resort attempt
> host=switch-2.nufone.net
> username=andrewkt
> context=default
> auth=md5
> secret=mypass
>
> At some point last night, I think I had * registering properly with
> nufone, as it showed up when I did "iax2 show registry" Now, it does
> not. I'm not worried about that yet, as my (brand new) toll free did
> doesn't seem to be working anyway (doesn't ring to failover, I get a
> message from my LEC saying the number is disconnected).
>
> My dialout line is a copy of my working voicepulse out section:
>
> [NuFoneOut]
> exten => _1NXXNXXXXXX,1,SetCallerID(9104108307)
> exten => _1NXXNXXXXXX,2,Dial(IAX2/andrewkt at nufone/${EXTEN})
> exten => _1NXXNXXXXXX,3,Congestion
> exten => _1NXXNXXXXXX,4,Hangup
>
>
> -- 
> Andrew Thompson
> http://aktzero.com/
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>