[Asterisk-Users] Dlink DVG-1120 Linksys PAP2 any Good?

[Kubat, Philip]

I use the mgcp firmware (AT&T) version with out issues.  One trick was to
use the "wan" port and not the "lan" port as RTP seems to only go in/out on
the wan port.

IAN, Where did you obtain SIP firmware?  I no longer seems available from
DLink's site.  Is the only difference for mgcp and sip firmware?

Thanks
Phil

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Isaac McDonald
Sent: Wednesday, October 06, 2004 1:43 PM
To: ehartman at indigital.net; Asterisk Users Mailing List - Non-Commercial
Discussion
Subject: Re: [Asterisk-Users] Dlink DVG-1120 Linksys PAP2 any Good?

Eric Hartman wrote:

>I had just found a Dlink DVG-1120 on ebay and I'm curious if anyone has
>used you it with asterisk.  They were only $65.  I have tested with the
>Linksys Pap2 and found that box to be fairly nice except for a lot of
>backgound/white noise.  I was wondering if any else had experienced
>that?  Let me know if I've wasted $65 on the Dlink and also if you had
>similar experience with white noise on the pap2?
>
>Thanks
>Eric
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>  
>
Eric,

I had a DVG-1120M (mgcp) that I converted to a DVG-1120S (sip) with a 
firmware upgrade. I use my DVG-1120S with my * box on a daily 
bases......it works fine.


IAM
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users