[Asterisk-Users] IAX2 trunk mode not working

[Javier Pinzon]

Kristian - thanks. Do you mean I need a Digium card on each box? I do have
one on each box (A=TE410P, B=2xTDM400P).

Any additional configuration required to enable the timing device?

Thanks

-----Original Message-----
From: Kristian Kielhofner [mailto:kris at krisk.org] 
Sent: Monday, October 04, 2004 11:45 PM
To: jpinzon at vir2com.com; Asterisk Users Mailing List - Non-Commercial
Discussion
Subject: Re: [Asterisk-Users] IAX2 trunk mode not working

Javier Pinzon wrote:
> Hi all - We have several servers working just fine with IAX2 w/o trunk
mode.
> 
>  
> 
> We are trying to setup trunk mode to save bandwidth, but we can not 
> achieve the savings with our current configuration (see below).
> 
>  
> 
> When we place a call between * boxes A & B it works fine, but the 
> command 'iax2 trunk debug' shows no activity for the trunk mode (1 peer, 
> 0 calls).
> 
>  
> 
> Anyone who has been able to configure IAX2 trunks can help?
> 

You need a timing device in both machines to do trunking.  See some of 
my earlier posts regarding timing issues, or check the wiki.

--
Kristian Kielhofner