[Asterisk-Users] problems with X100P-Nochanneltyperegisteredfor'Zap'

[khoonking]

[channels]
switchtype=national
echocancel=yes
echocancelwhenbridged=yes
signalling=fxs_ks
context=incoming
channel => 1 ;X100P 
 


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Wiley E. Siler
Sent: Tuesday, October 05, 2004 5:50 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] problems with
X100P-Nochanneltyperegisteredfor'Zap'

You should see something like this.... (I have 8 channels)

tuxpbx*CLI> zap show channels
   Chan Extension  Context         Language   MusicOnHold
 pseudo            incoming        en
      1            incoming        en
      2            incoming        en
      3            incoming        en
      4            incoming        en
      5            incoming        en
      6            incoming        en
      7            incoming        en
      8            incoming        en
tuxpbx*CLI> 

What is the full contents of your zapata.conf?

W

-----Original Message-----
From: khoonking [mailto:khoonkingsg at yahoo.com.sg] 
Sent: Tuesday, October 05, 2004 2:32 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] problems with X100P
-Nochanneltyperegisteredfor'Zap'

>If you run ZAP SHOW CHANNELS from the CLI what do you see?
No such command

 
 
Best Regards
Meng Kim
 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Wiley E.
Siler
Sent: Tuesday, October 05, 2004 5:13 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] problems with X100P -
Nochanneltyperegisteredfor'Zap'

This may seem obvious or silly but have you tried using a different
phone cord?
A bad phone cord played havoc on a colleague of mine during initial
config.

Fro what you show as your output from ztcfg, you should have one channel
configured successfully then.  
Your example shows you have the channel set to one so no problem there. 

If you run ZAP SHOW CHANNELS from the CLI what do you see?

W




-----Original Message-----
From: khoonking [mailto:khoonkingsg at yahoo.com.sg]
Sent: Tuesday, October 05, 2004 1:53 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] problems with X100P -
Nochanneltyperegisteredfor 'Zap'

Hi,

This is what I have when I run ztcfg

[root]# modprobe zaptel
[root]# modprobe wcfxo
[root]# ztcfg -vv

Zaptel Configuration
======================


Channel map:

Channel 01: FXS Kewlstart (Default) (Slaves: 01)

1 channels configured.

 


>Basically you need to look through the startup messages till you come 
>up with the proper error message concerning why it isn't accepting the 
>zap definition.
I don't see any error message when I run asterisk -vvvvgc.
Ussually, it will print parsing of extensions.conf, sip.conf and etc.
Does it parse the file zapata.conf?



 


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steven
Critchfield
Sent: Tuesday, October 05, 2004 3:39 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] problems with X100P -
Nochanneltyperegistered for 'Zap'

On Tue, 2004-10-05 at 02:15, khoonking wrote:
> Hi,
> 
> I have confirmed that there is no space between "=>" but still the 
> same problem.
> 
> > zapatel.conf
> > ========================
> > [channels]
> > signalling=fxs_ks
> > context=incoming
>  channel => 1 ;X100P
> 
> >[incoming]
> >;exten => s,1,Echo ;for testing the connection
> >exten => s,1,Answer			; Answer the line
> >exten => s,2,Playback,demo-thanks ;for playing a file
> 
> > [default]
> > exten => 6200,1,Dial(SIP/6200,20)
> > exten => 6203,1,Dial(SIP/6203,20)
> > exten => _X.,1,Dial,Zap/1/${EXTEN}
> 
> When I call from an analog phone to the X100P ext, Asterisk CLI screen

> does not print anything.

if asterisk doesn't know about the port yet, it can't detect the signal
nor answer the line. Basically you need to look through the startup
messages till you come up with the proper error message concerning why
it isn't accepting the zap definition.


--
Steven Critchfield <critch at basesys.com>

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you
received this in error, please contact the sender and delete the
material from any computer

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users