[Asterisk-Users] Second X100P card won't work

[Eric Jacksch]

Thanks Vassilis!  Shuffling the PCI cards did the trick.  If you're ever in
Ottawa, I owe you a few beer.

Regards,
Eric


On 2004-10-03 02:36, "Vassilis Konstantinou"
<vassilis_konstantinou at btinternet.com> wrote:

> Eric,
> Make sure that both the X100Ps do not share their allocated interrupts with
> any other card installed in your computer. If they do you will have plenty
> of problems. This may need you to reposition them on the pci slots and/or
> reserve interrupts for them. I had endless problems with my two cards until
> I noticed that they were sharing their interrupts.
> 
> I hope this helps
> 
> 
> Vassilis
> 
> At 06:04 03/10/2004, you wrote:
>> Greetings all,
>> 
>> I've just put two X100P cards to my box and despite trying everything I
>> can find on the web, I can't get the second one to work.
>> 
>> I've edited /etc/modules.conf so that ztcfg doesn't run automatically.
>> 
>> To start, I run:
>> 
>> /sbin/modprobe zaptel
>> /sbin/modprobe wcfxo
>> /sbin/ztcfg
>> /sbin/modprobe ixj
>> 
>> and ztcfg says:
>> 
>> ZT_CHANCONFIG failed on channel 2: No such device or address (6)
>> 
>> Two channels are defined in zapata.conf and zapte.conf, but only the
>> first one works.
>> 
>> Asterisk says:
>> 
>>  == Parsing '/etc/asterisk/zapata.conf': Found
>>     -- Registered channel 1, FXS Kewlstart signalling
>> Oct  3 00:52:32 WARNING[-1218576256]: chan_zap.c:731 zt_open: Unable to
>> specify channel 2: Device or resource busy Oct  3 00:52:32
>> ERROR[-1218576256]: chan_zap.c:5895 mkintf: Unable to open channel 2:
>> Device or resource busy here = 0, tmp->channel = 2, channel = 2 Oct  3
>> 00:52:32 ERROR[-1218576256]: chan_zap.c:8817 setup_zap: Unable to
>> register channel '2' Oct  3 00:52:32 WARNING[-1218576256]: loader.c:334
>> ast_load_resource: chan_zap.so: load_module failed, returning -1
>>   == Unregistered channel type 'Tor'
>>   == Unregistered channel type 'Zap'
>>     -- Unregistered channel 1
>> Oct  3 00:52:32 WARNING[-1218576256]: loader.c:429 load_modules: Loading
>> module chan_zap.so failed!
>> 
>> 
>> Can anyone help?
>> 
>> Thanks,
>> eric
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

-- 
Eric Jacksch, CISSP, CISM
Tenebris Technologies Inc.
http://www.tenebris.ca
+1 613 860-0964
jacksch at tenebris.ca

Information security consulting, investigations, and forensics.