[Asterisk-Users] SNOM 200 can't conference.

[Alex Barnes]

Update:

I have installed the firmware you suggested
(http://www.snom.com/download/share/snom200-3.49-SIP.bin).

The MWI appears to be fixed in this build so I will be sticking with
that, thanks for that.

However still no joy on the conferencing front.  I have looked at the
Snom 200 user guide but when I have someone on hold and another person
active the soft button says "HeadRJ" and not "Conf.On" as it mentions in
the user guide.

I am only able to try this with a Pingtel hardphone and a Optipoint 400
as I don't have any other SIP phones on my desk at the moment.  Could
this have something to do with the other phones not being Snom ????

Any hints or advice would be greatly appreciated.

Alex

-----Original Message-----
From: Alex Barnes 
Sent: 01 October 2004 10:09
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] SNOM 200 can't conference.


Hi,

I have a Snom 200 and also cannot get the conferencing to work.
Transfering isn't a problem, including attended xfr.

Sven could you expand on what you mean by "Don't use low rate codecs !"
I have tried u-law and G792a and neither appear to make any difference.

Also I am currently running Snom build snom200-2.04g-SIP.bin as when I
tried the latest 3.xx beta build I found that the MWI (voicemail) button
would stay on no matter if all the voicemails had been deleted.  Was
wondering if you have the same issue?

Cheers

alex


---SNIPPED---

-----Original Message-----
From: Sven Fischer (support) [mailto:fischer at snom.de] 
Sent: 01 October 2004 08:53
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] SNOM 200 can't conference.

Don't use low rate codecs !

Regards,

Sven


Dear Friends of Ubiquity Software: 
 
As you may have noticed, Ubiquity Software began using the web domain ubiquity.com earlier this year in addition to the previously established ubiquity.net for our website and email communications to you.  However, since that time, a dispute has emerged with respect to actual ownership of the ubiquity.com domain.
 
As an international software company founded over decade ago, you can always reach Ubiquity Software under the website www.ubiquity.net <http://www.ubiquity.net/>  and via email at @ubiquity.net.  However, we have also chosen to expand our domain to the more specific www.ubiquitysoftware.com <http://www.ubiquitysoftware.com/>  for web and @ubiquitysoftware.com for email communications.
 
Please use either the historical ubiquity.net or begin to use the new ubiquitysoftware.com domain for all email communications to Ubiquity employees from now on. 
 
Thank you.
 
Regards,
 
Ubiquity Software 
www.ubiquitysoftware.com <http://www.ubiquitysoftware.com/> 
info at ubiquitysoftware.com