[Asterisk-Users] PRI Dialing failure?

[Bob Goddard]

On Sunday 28 November 2004 19:01, mfarver at ticom.com wrote:
> So I reached the point where my PRI is accepting incoming calls, but I
> cannot dialout.  I must be doing something stupid, but I can't figure it
> out.  The Asterisk box is sitting between the Mitel and the phone company,
> and has PRI lines to each.  Asterisk was built from CVS r1-0
[...]
> -------------------------
> zapata.conf:
> -------------------------
> [channels]
>
> #Mitel
> switchtype=dms100
> context=frommitel
> signalling=pri_net
> group=>1
> channel => 25-47
>
> #Verizon
> switchtype=dms100
> context=external
> signalling=pri_cpe
> group=>2
> channel => 49-71
>
> -------------------------
> extensions.conf
> -------------------------
> [globals]
> OUTGOING-TRUNK=Zap/g3

Neither of your 2 PRIs are in group 3. Your span 1 seems non-existent.


B