[Asterisk-Users] Zaptel on Suse 9.0

[Ashish Shinde]

Hi,
   I have two WCT100P cards installed on a suse 9.0 box. Installation
for Zaptel complains of some unresolved dependencies. The zaptel and
wct1xxp modules load without any errors. ztcfg give no problems.
 
  The problem is when I start asterisk I get the following error and
asterisk shuts down

-----------------------------------------------------------------------------------------------------
Nov 24 21:28:15 WARNING[18825]: chan_zap.c:765 zt_open: Unable to
specify channel 1: No such device or address
Nov 24 21:28:15 ERROR[18825]: chan_zap.c:6195 mkintf: Unable to open
channel 1: No such device or address
here = 0, tmp->channel = 1, channel = 1
Nov 24 21:28:15 ERROR[18825]: chan_zap.c:9139 setup_zap: Unable to
register channel '1-23'
Nov 24 21:28:15 WARNING[18825]: loader.c:334 ast_load_resource:
chan_zap.so: load_module failed, returning -1
  == Unregistered channel type 'Tor'
  == Unregistered channel type 'Zap'
Nov 24 21:28:15 WARNING[18825]: loader.c:429 load_modules: Loading
module chan_zap.so failed!
----------------------------------------------------------------------------------------------------

  My /etc/zaptel.conf file reads
          
      loadzone=us
     defaultzone=us
     span=1,0,0,d4,b8zs
     bchan=1-23
     dchan=24

     span=2,0,0,d4,b8zs
     bchan=25-47
     dchan=48
 
  The /etc/asterisk/zapata.conf reads
     context = default
     switchtype = national
     signalling = pri_cpe
     group = 1
     channel => 1-23

     context = default
     switchtype = national
     signalling = pri_cpe
     group = 2
     channel => 25-47

 I don't know if it is some configuration error, or some problem with
zaptel and suse9.0.
 I would really be grateful if someone could help me in this regards.

Thanks and regards,
  - Ashish Shinde