[Asterisk-Users] SOLVED! - ADSI questions for a 390 ADSI Phone

Rob Emanuele rje at shoreis.com
Mon Nov 22 19:07:56 MST 2004 

Matt,

After playing with this for a while you were the key.  You're lock code
worked.  It put my adsi script into the <available SL> slot, slot 4, and
was auto-loaded.  Thanks a lot!!!

Thanks,

Rob

On Tue, 2004-11-16 at 09:55, Rob Emanuele wrote:
> Any other thoughts on this?
> 
> Thanks,
> 
> Rob
> 
> > Yup, has the IDLE in there from the beginning.
> >
> > Does the adsi.conf have anything to do with it?  (Probably no, but I'm
> > grasping.)
> >
> > On Mon, 2004-11-15 at 21:05, dbruce at transit2.bananatel.com wrote:
> >> Make sure your ADSI script has an 'IFEVENT IDLE THEN' block...
> >>
> >> IE:
> >>
> >> IFEVENT IDLE THEN
> >>     CLEAR
> >>     SHOWDISPLAY "titles" AT 1
> >>     SHOWKEYS "sd_1"
> >> ENDIF
> >>
> >> ----- Original Message -----
> >> From: "Rob Emanuele" <rje at shoreis.com>
> >> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> >> <asterisk-users at lists.digium.com>
> >> Sent: Monday, November 15, 2004 8:09 PM
> >> Subject: Re: [Asterisk-Users] ADSI questions for a 390 ADSI Phone
> >>
> >>
> >> > OK, so I've programmed the default adsi script into slots 1 and 2.
> >> > Comedian took up slot 3.
> >> >
> >> > Comedian now works properly and doesn't ask me every time to
> >> re-download
> >> > the scripts.
> >> >
> >> > Going off-hook shows me the correct menu.   That works right.
> >> >
> >> > I still cannot get the default display to work.  When the phone is
> >> idle
> >> > all it ever tells me is the time until I run one of the Asterisk
> >> > services manually.
> >> >
> >> > What gives?
> >> >
> >> > Script 1:
> >> > DESCRIPTION "Asterisk PBX" ; Name of vendor
> >> > VERSION 0x00 ; Version of stuff
> >> > ;SECURITY "_AST" ; Security code
> >> > SECURITY 0X9BDBF7AC ; Security code
> >> > FDN 0x0000000F ; Descriptor number
> >> > etc.
> >> >
> >> > Script 2:
> >> > DESCRIPTION "Asterisk PBX" ; Name of vendor
> >> > VERSION 0x00 ; Version of stuff
> >> > ;SECURITY "_AST" ; Security code
> >> > SECURITY 0X78921D49  ; Security code
> >> > FDN 0x85EFD9DA ; Descriptor number
> >> > etc.
> >> >
> >> > On Mon, 2004-11-15 at 17:42, dbruce at transit2.bananatel.com wrote:
> >> >> The following is taken from the Sayson/Aastra 390/480 ADSI
> >> Programming
> >> >> Guide
> >> >>
> >> >> Slot 1
> >> >>
> >> >> FDN: 0.0.0.F
> >> >>
> >> >> SECURITY: 9B.DB.F7.AC
> >> >>
> >> >> Slot 2
> >> >>
> >> >> FDN: 85.EF.D9.DA
> >> >>
> >> >> SECURITY: 78.92.1D.49
> >> >>
> >> >> Slot 3
> >> >>
> >> >> FDN: 7B.C6.45.0C
> >> >>
> >> >> SECURITY: 9B.60.94.30
> >> >>
> >> >> Slot 4
> >> >>
> >> >> FDN: FE.2E.A5.D1
> >> >>
> >> >> SECURITY: 79.A9.0C.F0
> >> >>
> >> >> Explanation of the Slots in Services
> >> >>
> >> >> Slot 1
> >> >>
> >> >> This is the only slot that should contain programming in order for a
> >> >> script
> >> >> to be active during regular phone activities. The programming in this
> >> >> slot
> >> >> is triggered when the phone detects call activity, for example, when
> >> the
> >> >> phone rings or is placed off-hook.
> >> >>
> >> >> Slot 2
> >> >>
> >> >> This is the Self Launching slot for these phones and is triggered
> >> when
> >> >> the
> >> >> phone has had no call activity for a certain amount of time. On all
> >> 390
> >> >> and
> >> >> older 480 phones this, amount of time is 6-7 seconds. On new 480
> >> phones,
> >> >> this amount of time is almost immediate. The programming downloaded
> >> into
> >> >> this slot can be identical to slot 1, or it can be completely
> >> different,
> >> >> such as for advertising purposes.
> >> >>
> >> >> Slots 3 and 4
> >> >>
> >> >> The only way these can be activated is by pressing the "Services"
> >> button
> >> >> on
> >> >> your phone and scrolling down and selecting a slot. Slots 3 and 4
> >> cannot
> >> >> be
> >> >> activated this way while the phone is active, for example, when on a
> >> >> call.
> >> >>
> >> >> Note: Whenever the "goodbye" button is pressed or if the phone placed
> >> >> on-hook, the phone will exit the programming and go back to it's
> >> default
> >> >> screen until the programming is triggered again.
> >> >>
> >> >> ----- Original Message -----
> >> >> From: "Matt Gibson" <gibson at experthost.com>
> >> >> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> >> >> <asterisk-users at lists.digium.com>
> >> >> Sent: Monday, November 15, 2004 5:22 PM
> >> >> Subject: Re: SPAM: Re: [Asterisk-Users] ADSI questions for a 390 ADSI
> >> >> Phone
> >> >>
> >> >>
> >> >> > Rob Emanuele wrote:
> >> >> >
> >> >> >>So load asterisk into Slot 1 & 2 and put Commedian in slot 3?
> >> Sounds
> >> >> >>easy
> >> >> >>enough.  Does that amke voicemail notification work too?
> >> >> >>
> >> >> >>
> >> >> >
> >> >> > Where did you guys get the codes for slot 3? I have the FDN/SEC
> >> codes
> >> >> > for
> >> >> > Slot 4, but have not been able to find the codes for 1,2,3.
> >> >> > I've talked with Sayson, and they seem to have 'forgotten' about
> >> me...
> >> >> > I
> >> >> > bought my phone from Radioshack here in Canada.
> >> >> >
> >> >> > Could you send me the codes you guys have working so I can test
> >> them
> >> >> > with
> >> >> > my phone?
> >> >> >
> >> >> > Currently I have:
> >> >> > SECURITY 0x01000006                    FDN 0x01000006
> >> >> >
> >> >> > for slot 4.
> >> >> >
> >> >> > Matt
> >> >> >
> >> >> > --
> >> >> > Matt Gibson
> >> >> > VOIP Administrator
> >> >> > NJ Tech Solutions
> >> >> > 1.314.480.4550 ex. 6400
> >> >> > 1.877.999.4678 ex. 6400
> >> >> >
> >> >> >
> >> >> >
> >> >> > _______________________________________________
> >> >> > Asterisk-Users mailing list
> >> >> > Asterisk-Users at lists.digium.com
> >> >> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >> >> > To UNSUBSCRIBE or update options visit:
> >> >> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >> >>
> >> >> _______________________________________________
> >> >> Asterisk-Users mailing list
> >> >> Asterisk-Users at lists.digium.com
> >> >> http://lists.digium.com/mailman/listinfo/asterisk-users
> >> >> To UNSUBSCRIBE or update options visit:
> >> >>    http://lists.digium.com/mailman/listinfo/asterisk-users
> >> >
> >> > _______________________________________________
> >> > Asterisk-Users mailing list
> >> > Asterisk-Users at lists.digium.com
> >> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >> > To UNSUBSCRIBE or update options visit:
> >> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >>
> >> _______________________________________________
> >> Asterisk-Users mailing list
> >> Asterisk-Users at lists.digium.com
> >> http://lists.digium.com/mailman/listinfo/asterisk-users
> >> To UNSUBSCRIBE or update options visit:
> >>    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

More information about the asterisk-users mailing list