[Asterisk-Users] Voice in Asterisk with BRI ISDN Any properworking configurations yet?

[Christiaan Brink]

I've tried using bri-stuff.  I got everything compiled and installed but, it
seems that the driver stalls our ISDN NTU provided by the operator.

As I said I'm running the 2.6.5 kernel.  I have a HFC card and our operator
uses alaw over EuroISDN.  My zaptel.conf file is as follows:

loadzone=us
defaultzone=us

span=1,1,3,ccs,ami
bchan=1-2
dchan=3

Have you been able to get it going with BRI stuff?

Regards
Christiaan


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Alessio
Focardi
Sent: Thursday, November 18, 2004 3:51 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Voice in Asterisk with BRI ISDN Any
properworking configurations yet?

Hello Christiaan,

Thursday, November 18, 2004, 2:40:00 PM, you wrote:

CB> Hi all

CB>  

CB> If been working a while now trying to interface Asteriskswith
CB> BRI ISDN.  I’ve tried various drivers without any success. 
CB> I’mrunning a HFC passive ISDN board in 2.6.5 kernel.

are you using the "bristuffed" version of asterisk ?

http://www.junghanns.net/asterisk/

Exactly what is the problem you are experiencing ?

Regards !


-- 
Best regards,
 Alessio                            mailto:afoc at interconnessioni.it

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users