[Asterisk-Users] Re 2 x100p cards H E L P (I have no hair left) Again!

Samantha (Femtech) samantha at femtech.com.au
Mon Nov 15 17:57:19 MST 2004


Sorry about taking so long to get back
The problem still exisits
I have tested both cards and they are OK
Still cant get both cards to work

r2d2*CLI> zap show channel 1
Channel: 1
File Descriptor: 21
Span: 1
Extension:
Dialing: no
Context: pstnin
Caller ID:
Caller ID name:
Destroy: 0
InAlarm: 1<<<<<<<<<<<<<<<<<<<<<<<<<<?????????
Signalling Type: FXS Loopstart
Owner: <None>
Real: <None>
Callwait: <None>
Threeway: <None>
Confno: -1
Propagated Conference: -1
Real in conference: 0
DSP: no
Relax DTMF: yes
Dialing/CallwaitCAS: 0/0
Default law: ulaw
Fax Handled: no
Pulse phone: no
Echo Cancellation: 128 taps, currently OFF
Actual Confinfo: Num/0, Mode/0x0000
Actual Confmute: No
Actual Hookstate: Onhook
r2d2*CLI>

Channel: 2
File Descriptor: 22
Span: 2I>
Extension:
Dialing: no
Context: incoming
Caller ID:
Caller ID name:
Destroy: 0
InAlarm: 0
Signalling Type: FXS Kewlstart
Owner: <None>
Real: <None>
Callwait: <None>
Threeway: <None>
Confno: -1
Propagated Conference: -1
Real in conference: 0
DSP: no
Relax DTMF: yes
Dialing/CallwaitCAS: 0/0
Default law: ulaw
Fax Handled: no
Pulse phone: no
Echo Cancellation: 128 taps, currently OFF
Actual Confinfo: Num/0, Mode/0x0000
Actual Confmute: No
Actual Hookstate: Onhook
r2d2*CLI>


r2d2:/etc# more zaptel.conf
#
fxsls=1
fxsks=2
loadzone=au
defaultzone=au
r2d2:/etc#

r2d2:/etc/asterisk# more zapata.conf
[channels]
busydetect=yes
busycount=1
rxwink=300
relaxdtmf=yes
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
usecallerid=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=6.0
txgain=4.0
immediate=no
signalling=fxs_ls
callerid=asreceived
musiconhold=default
;
;pickupgroup=1-2
;
context=pstnin
group=1
signalling=fxs_ls
callerid=asreceived
;immediate=yes
channel =>1
;
context=incoming
group=1
signalling=fxs_ks
callerid=asreceived
;immediate=yes
channel =>2

r2d2:/etc/asterisk#






r2d2:/home/s/samantha# lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] 
(rev 03)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 
AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super 
South] (rev 40)
0000:00:07.1 IDE interface: VIA Technologies, Inc. 
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller (rev 1a)
0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller (rev 1a)
0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] 
(rev 40)
0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 
AC97 Audio Controller (rev 50)
0000:00:08.0 Communication controller: Tiger Jet Network Inc. Tiger3XX 
Modem/ISDN interface
0000:00:09.0 Communication controller: Tiger Jet Network Inc. Tiger3XX 
Modem/ISDN interface
0000:00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL-8139/8139C/8139C+ (rev 10)
0000:01:00.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 
Banshee (rev 03)
r2d2:/home/s/samantha#

r2d2:/home/s/samantha# lsmod
Module                  Size  Used by
wcfxo                  12864  0
zaptel                224772  9 wcfxo
crc_ccitt               2144  2 zaptel,hisax
isdn                  147948  1 hisax
slhc                    7488  1 isdn
r2d2:/home/s/samantha#

r2d2:/home/s/samantha# more /proc/interrupts
           CPU0
  0:   38812699          XT-PIC  timer
  2:          0          XT-PIC  cascade
  5:          0          XT-PIC  acpi
  8:          1          XT-PIC  rtc
 10:   38776378          XT-PIC  wcfxo
 11:     984588          XT-PIC  via82cxxx, uhci_hcd, uhci_hcd, eth0
 12:   38776632          XT-PIC  wcfxo
 14:      46300          XT-PIC  ide0
 15:         12          XT-PIC  ide1
NMI:          0
LOC:   38810573
ERR:     128274
MIS:          0
r2d2:/home/s/samantha#




----- Original Message ----- 
From: "Lyle Giese" <lyle at lcrcomputer.net>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>
Sent: Thursday, October 07, 2004 9:35 AM
Subject: Re: [Asterisk-Users] Re 2 x100p cards H E L P (I have no hair left)


> How about IRQ's?  These cards require unique and seperate IRQ's.
>
> I used two of these cards quite well to start out with on my test * 
> server.
>
> Lyle
>
> ----- Original Message ----- 
> From: "Samantha (Femtech)" <samantha at femtech.com.au>
> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> <asterisk-users at lists.digium.com>
> Sent: Wednesday, October 06, 2004 4:19 PM
> Subject: [Asterisk-Users] Re 2 x100p cards H E L P (I have no hair left)
>
>
>> Hi
>>
>> Has anyone had any luck in putting two of these im a box?
>> May I ask how....  I am starting to go bald....
>> I do have a suggestion is make another box and link them with iax2
>>
>> Thanks
>>
>> Samantha
>>
>>
>>
>>
>> r2d2:/home/s/samantha# ztcfg -vv
>>
>> Zaptel Configuration
>> ======================
>>
>>
>> Channel map:
>>
>> Channel 01: FXS Kewlstart (Default) (Slaves: 01)
>> Channel 02: FXS Kewlstart (Default) (Slaves: 02)
>>
>> 2 channels configured.
>>
>> r2d2:/home/s/samantha#
>>
>>
>> r2d2:/home/s/samantha# asterisk -r
>> Asterisk CVS-HEAD-09/30/04-00:12:06, Copyright (C) 1999-2004 Digium.
>> Written by Mark Spencer <markster at digium.com>
>> =========================================================================
>> Connected to Asterisk CVS-HEAD-09/30/04-00:12:06 currently running on 
>> r2d2
>> (pid = 2651)
>> r2d2*CLI> zap show channels
>>    Chan Extension  Context         Language   MusicOnHold
>>  pseudo            pstnin                     default
>>       1            pstnin                     default
>>       2            pstnin                     default
>> r2d2*CLI>
>>
>>
>> my /etc/asterisk/zapata.conf
>>
>> [channels]
>> context=default
>> switchtype=national
>> signalling=fxs_ls
>> rxwink=300              ; Atlas seems to use long (250ms) winks
>> usecallerid=yes
>> hidecallerid=no
>> callwaiting=yes
>> callwaitingcallerid=yes
>> threewaycalling=yes
>> transfer=yes
>> cancallforward=yes
>> callreturn=yes
>> echocancel=yes
>> echocancelwhenbridged=yes
>> rxgain=1.0
>> txgain=7.0
>> group=1
>> callgroup=1
>> pickupgroup=1
>> immediate=no
>> musiconhold=default
>> ;
>> ;
>> context=pstnin
>> signalling=fxs_ks
>> usecallerid=yes
>> channel=>1,2
>>
>>
>>
>> The card in the lower ide port works ok  (fxo card 1)
>> fx2 downt accept incomming or allow outgoing
>> Outgoing calls end up like
>>
>> r2d2:/etc/asterisk# asterisk -r
>> Asterisk CVS-HEAD-09/30/04-00:12:06, Copyright (C) 1999-2004 Digium.
>> Written by Mark Spencer <markster at digium.com>
>> =========================================================================
>> Connected to Asterisk CVS-HEAD-09/30/04-00:12:06 currently running on 
>> r2d2
>> (pid = 2651)
>> Oct  7 07:17:24 NOTICE[1114889136]: app_dial.c:742 dial_exec: Unable to
>> create channel of type 'Zap'
>> r2d2*CLI>
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users 




More information about the asterisk-users mailing list