[Asterisk-Users] Re: Help with this debug output?

[Eric Wieling]

Other than the standard codec issues?  No.  disallow=all and allow=ulaw 
in [general] in sip.conf.  NO other allow= lines.

Chris TenHarmsel wrote:
> No one?
> 
> 
> On Mon, 15 Nov 2004 12:40:42 -0500, Chris TenHarmsel <epchris at gmail.com> wrote:
> 
>>Hi all,
>>I've attached the output from asterisk with "set verbose 3".  During
>>the time in the file, I placed two calls with my Zyxel 2000w to a
>>Cisco 7912g.  The first call worked fine, I was able to talk to the
>>person on the other phone.  The second call went through and rung the
>>7912g, but I was unable to hear the other person, and they could not
>>hear me.  This continues until I reset the 2000w, at which time, one
>>call works again.
>>
>>Any ideas from this output as to why this is happening?