[Asterisk-Users] Recommendations for Asterisk + Lucent MerlinLegend PBX Topology

[rsenykoff at harrislogic.com]

<snip>
> The idea is that I set the PBX to use several lines for the same
> extension.
> So you could make that a single digit '5' extension or something. Then
> Asterisk picks up and asks for the WAN extension which would route to 
the
> correct Asterisk box on the other end, which would also have multiple
> lines
> to the PBX.
> 
> Is it possible to configure PBXs in such a way? i.e. that multiple lines
> are assigned to the same extension? Is there another way I should be
> researching doing this? My reasoning for multiple lines is to allow X
> number of simultaneous calls between sites.

=======================================================
Yes, that can be done. What you'd do is use IAX2 between the Asterisk
servers. I suggest you get a couple of old boxes and install Asterisk and
just start playing with it.
</snip>

Here's a URL I found with some useful information:

http://www.voip-info.org/wiki-Asterisk+legacy+integration

-Ron
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041115/390fe1cf/attachment.htm