[Asterisk-Users] Kirk IP 600 DECT station

[Remco Barende]

OK, I just got the Kirk IP 600 kit :)

It turns out that they actually make one unit that does H323 and can do 
Skinny (Cisco) if you buy the version with a license for it. Mine supports 
both.

The box appears to be running linux btw :)
nmap revealed 2 open ports, telnet and http and also
TCP/IP fingerprint:
SInfo(V=3.55%P=i686-pc-linux-gnu%D=11/12%Time=419509CD%O=23%C=1)

I couldn't find any info on this station and how to connect it to * but 
that's ok :)

It seems that you must configure the phones as Cisco 7940 in Call Manager. 
The Wiki about the 7940 uses SIP which will not work so I have to try 
skinny or H323.

I think the best way would be to use the skinny protocol but I'm a bit 
lost there. When looking for info on cisco protocol I actually found 3 
channels : chan_skinny / chan_sccp and asterisk-sccp.

Hopefully chan_skinny which comes with * is ok?

The wiki SCCP-HOWTO2 says :
noload=chan_skinny.so
but I guess I do want to load skinny?? should I specify load= ?

I will keep posting results to the list and finally add a wiki when it's 
working, hope any of the cisco experts can help :)

Thanks for any input!