[Asterisk-Users] TDM400p module error?

[Paul Fielding]

I've managed to get my Asterisk server up and working, and my TDM400p seems to be working fine, inside and outside lines.   I was pouring through the syslog looking for a different issue when I noticed the following 'Prosilc Failed' message (9 lines in):

Nov 11 17:34:36 natasha kernel: Zapata Telephony Interface Registered on major 196
Nov 11 17:34:36 natasha kernel: PCI: Found IRQ 10 for device 00:0b.0
Nov 11 17:34:36 natasha kernel: PCI: Sharing IRQ 10 with 00:11.0
Nov 11 17:34:36 natasha kernel: Freshmaker version: 71
Nov 11 17:34:36 natasha kernel: Freshmaker passed register test
Nov 11 17:34:36 natasha kernel: Module 0: Installed -- AUTO FXS/DPO
Nov 11 17:34:36 natasha kernel: Timeout waiting for calibration of module 1
Nov 11 17:34:36 natasha kernel: Timeout waiting for calibration of module 1
Nov 11 17:34:36 natasha kernel: Proslic Failed on Second Attempt to Auto Calibrate
Nov 11 17:34:36 natasha kernel: Module 1: Installed -- MANUAL FXS
Nov 11 17:34:36 natasha kernel: Module 2: Installed -- AUTO FXO (FCC mode)
Nov 11 17:34:36 natasha kernel: Module 3: Installed -- AUTO FXO (FCC mode)
Nov 11 17:34:36 natasha kernel: Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules)
Nov 11 17:34:36 natasha kernel: Registered tone zone 0 (United States / North America)

Should I be concerned, or is this normal?

regards,

Paul
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041111/a69cce41/attachment.htm