[Asterisk-Users] DID/PRI sending to the s, extension instead of t he DID extension

[Colin Anderson]

I've got some DID's on a PRI that I want to ring an extension when the
trailing digits match an extension in the dialplan. 

Followed the instructions at:
http://www.voip-info.org/wiki-Asterisk+tips+DID

When I call the DID, Asterisk is not recognizing it as a DID and instead
sending it to the "s," extension in the same context. 

My PRI debug:

< Protocol Discriminator: Q.931 (8)  len=36
< Call Ref: len= 2 (reference 6/0x6) (Originator)
< Message type: SETUP (5)
< [04 03 80 90 a2]
< Bearer Capability (len= 5) [ Ext: 1  Q.931 Std: 0  Info transfer
capability: Speech (0)
<                              Ext: 1  Trans mode/rate: 64kbps, circuit-mode
(16)
<                              Ext: 1  User information layer 1: u-Law (34)
< [18 03 a1 83 97]
< Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0, Preferred
Dchan: 0
<                        ChanSel: Reserved
<                       Ext: 1  Coding: 0   Number Specified   Channel Type:
3
<                       Ext: 1  Channel: 23 ]
< [6c 0c 00 80 37 38 30 34 33 36 35 39 35 39]
< Calling Number (len=14) [ Ext: 0  TON: Unknown Number Type (0)  NPI:
Unknown Number Plan (0)
<                           Presentation: Presentation permitted, user
number not screened (0) '7804365959' ]
< [70 05 e9 30 35 34 35]
< Called Number (len= 7) [ Ext: 1  TON: Abbreviated number (6)  NPI: Private
Numbering Plan (9) '0545' ] <----NOTE THIS IS THE DID NUMBER
-- Making new call for cr 6
-- Processing Q.931 Call Setup
-- Processing IE 4 (cs0, Bearer Capability)
-- Processing IE 24 (cs0, Channel Identification)
-- Processing IE 108 (cs0, Calling Party Number)
-- Processing IE 112 (cs0, Called Party Number)
    -- Going to extension s|1 because of Complete received
    -- Accepting call from '7804365959' to 's' on channel 0/23, span 1

The target context:

exten => 0545,1,answer <--this doesn't kick in
exten => s,2,blah <---this is processed instead

Digium T100P <-----> Adtran Atlas 550

Atlas 550 is configured with User termination to the * box and Network
termination to the PSTN. On the User term, Strip MSD is off, Called Digits
Transferred is manually set to Four

Outbound calls work fine.