[Asterisk-Users] CallerID+Distinctive ring in Australia

[Elliot Mackenzie]

Incoming analog calls.

M.

Paul Hales wrote:

>Is this on analog or ISDN?
>A few of us discussed this a short while ago (call ID/Aust/analog) but
>nobody ever got anywhere.
>But I am sure that one of us will figure it all out soon enough.
>
>Later,
>
>PaulH
>Hawthorn
>Aust
>
>-----Original Message-----
>From: Elliot Mackenzie [mailto:asterisk at adixein.com] 
>Sent: Tuesday, 9 November 2004 6:01 PM
>To: Asterisk Users Mailing List - Non-Commercial Discussion
>Subject: Re: [Asterisk-Users] CallerID+Distinctive ring in Australia
>
>Whoops.  Apologies for sending this more than once.  I thought a sendmail
>upgrade had broken, but it was just slow :-)
>
>Someone mentioned there are some patches required to make callerid work in
>the UK.  Do similar patches apply for use in Australia?  How would I make my
>own modifications?  Is there some way I can record the analog signal
>incoming and play it back to  figure out what asterisk is doing with it?
>
>Kind regards,
>Elliot.
>
>Elliot Mackenzie wrote:
>
>  
>
>>I have a situation involving both caller id and distinctive ring in 
>>australia that appears to be having issues.  I am using the CVS 
>>snapshot current as of an hour ago.
>>
>>The distinctive ring was working ok until i arranged for the telco to 
>>turn on callerid: now the distinctive ring detection appears flaky and 
>>there is no callerid detected.
>>By flaky distinctive ring, I mean the three numbers that are being 
>>detected on an incoming call (ever since callerid was switched on), 
>>vary from [0,0,0] to more sensible numbers (sensible, though they 
>>still vary by too much to make sense of).
>>
>>Once I have seen "callerID returned with error", but this only 
>>happened once and said nothing further.  I haven't replicated this 
>>message when I have had the debugging cranked right up unfortunately.
>>
>>There was a newspost a while back that suggested increasing a delay in 
>>callerid.c, which I have done but to no avail.  I increased it from 
>>"4000" to "5600", as per the original post.
>>
>>Does anyone have ideas for what to try, or for how to start digging 
>>further?  This problem has been plaguing me for a month now.
>>
>>Kind regards,
>>Elliot.
>>
>>
>>
>>_______________________________________________
>>Asterisk-Users mailing list
>>Asterisk-Users at lists.digium.com
>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>To UNSUBSCRIBE or update options visit:
>>  http://lists.digium.com/mailman/listinfo/asterisk-users
>>    
>>
>
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>CAUTION: This email message and accompanying data may contain information
>that is confidential. If you are not the intended recipient, you are
>notified that any use, dissemination, distribution or copying of this
>message or data is prohibited. If you have received this email message in
>error, please notify us immediately and erase all copies of this message and
>attachments. Thank you.
>
>CAUTION: This email message and accompanying data may contain information that is confidential. If you are not the intended recipient, you are notified that any use, dissemination, distribution or copying of this message or data is prohibited. If you have received this email message in error, please notify us immediately and erase all copies of this message and attachments. Thank you.
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>  
>