[Asterisk-Users] TDM400P card on Mac dialtone problem

Stephen Smith stephen at norith.com
Mon Nov 8 11:53:10 MST 2004


I'm having trouble with a TDM400P card configured with one fxo and one 
fxs device. The system is a Mac G3 B/W running YellowDog 3.01 (2.4.22-2f 
kernel).

The card is installed with a power cable, it configures itself properly 
at boot time, ztcfg and zttool shows everything is fine. Asterisk 1-0-28 
starts fine with no errors and can sense a telephone handset going on 
and off hook on the fxs port. The simple switch starts up and stops when 
the handset goes back on-hook. The phone will also ring when a call is 
placed to it.

On the fxo port it can sense an incoming call from the analog phone 
line, answer the call and detect hangup.

However, neither the phone or the incoming call can receive or transmit 
anything. There's no dialtone when the phone is picked up, digit press 
are ignored and there is no sound heard on the incoming phone line when 
Asterisk playsback a sound file and cannot sense digit presses.

ztmonitor shows that the fxs channel sends dialtone to the phone goes 
off-hook but nothing is received when a key is pressed on the phone. 
I've played with txgain and rxgain without any benefit.

Anyone have any idea why ztmonitor would show that sound is being 
transmitted but yet there would still be no dialtone?

Thanks,

Stephen



More information about the asterisk-users mailing list