[Asterisk-Users] X100P Clone - Can't load moddule

[Dhennys Pestana]

Hello!

I'm trying to install Zaptel module so I can run a X100P clone (Intel 537,
MD 3200) as an FXO interface.

The problem is that after compilling and installing (successfull, aparently)
I can't load the module.

I tried (almost) every tip I was able to find on Google, Voip-Info and this
mailing-list, no success until now.

Anyone here got lucky with that? I hope so...

Running system is an old AMD 500Mhz with 64MB RAM on SuSE Linux 8.2 (no
plans to upgrade unless extremely necessary) with most packages updated.

Thanks in advance,

-Dhennys




woody sources/zaptel-1.0.2# uname -a
Linux woody 2.4.20-4GB #1 Tue Aug 10 10:44:07 UTC 2004 i586 unknown unknown
GNU/Linux
woody sources/zaptel-1.0.2#


woody sources/zaptel-1.0.2# ztcfg -vv

Zaptel Configuration
======================


Channel map:

Channel 01: FXS Kewlstart (Default) (Slaves: 01)

1 channels configured.

Notice: Configuration file is /etc/zaptel.conf
line 145: Unable to open master device '/dev/zap/ctl'
woody sources/zaptel-1.0.2#


woody sources/zaptel-1.0.2# lspci -vv

00:0a.0 Communication controller: Tiger Jet Network Inc. Intel 537
        Subsystem: Intel Corp.: Unknown device 0003
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (250ns min, 32000ns max)
        Interrupt: pin A routed to IRQ 10
        Region 0: I/O ports at d800 [size=256]
        Region 1: Memory at de800000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
PME(D0+,D1-,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-


woody sources/zaptel-1.0.2# lsmod | grep 537
Intel537             3695396   1


woody sources/zaptel-1.0.2# cat /proc/interrupts
           CPU0
  0:     621189          XT-PIC  timer
  1:          4          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:          0          XT-PIC  usb-ohci
  8:          2          XT-PIC  rtc
  9:          1          XT-PIC  acpi
 10:     611199          XT-PIC  537
 11:      72090          XT-PIC  eth0
 14:      96205          XT-PIC  ide0
NMI:          0
LOC:          0
ERR:          0
MIS:          0
woody sources/zaptel-1.0.2#


woody sources/zaptel-1.0.2# modprobe zaptel
/lib/modules/2.4.20-4GB/misc/zaptel.o: couldn't find the kernel version the
module was compiled for
/lib/modules/2.4.20-4GB/misc/zaptel.o: insmod
/lib/modules/2.4.20-4GB/misc/zaptel.o failed
/lib/modules/2.4.20-4GB/misc/zaptel.o: insmod zaptel failed
woody sources/zaptel-1.0.2#