[Asterisk-Users] Zaptel Issue in Fedora Core 2 test 3

[James Botham]

Ignore my last comment its worked hadn't commented it correctly.
 
Apologies 
 
James

-----Original Message-----
From: James Botham [mailto:James.Botham at computersoftware.com]
Sent: 05 November 2004 12:27
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Zaptel Issue in Fedora Core 2 test 3



I have done as below now I get a new error message when trying to make clean
or make install it says 

Makefile:230: *** missing rule before commands.  Stop. 

In the build I have these lines were slightly different the ifeq ($(DYNFS),)
is on line 230. I take it you didn't comment out the lines below as these
look like they are creating the device nodes.


Any ideas 

Thanks 

James 

-----Original Message----- 
From: Patrick Conroy [ mailto:patrick.j.conroy at gmail.com
<mailto:patrick.j.conroy at gmail.com> ] 
Sent: 05 November 2004 12:04 
To: Asterisk Users Mailing List - Non-Commercial Discussion 
Subject: Re: [Asterisk-Users] Zaptel Issue in Fedora Core 2 test 3 


> I have the following error once I have installed asterisk on my new Fedora

> Core 2 test 3 box with a T100P, compiled fine no problems after using the 
> info on voip-info.org but when i run ztcfg i get this error message: 
>   
> Notice: Configuration file is /etc/zaptel.conf 
> line 143: Unable to open master device '/dev/zap/ctl' 
>  


I had the same problem when I tried to install zaptel on FC2.  I 
resolved it by commenting out the following lines: 

ifeq ($(DYNFS),) 
else 
        @echo "**** Dynamic filesystem detected -- not creating device
nodes" 
        @echo "**** If you are running udev, read README.udev" 
endif 

from the zaptel Makefile (lines 233, 253-256 as of this morning's Makefile).


Hope this helps, 
Patrick 
_______________________________________________ 
Asterisk-Users mailing list 
Asterisk-Users at lists.digium.com 
http://lists.digium.com/mailman/listinfo/asterisk-users
<http://lists.digium.com/mailman/listinfo/asterisk-users>  
To UNSUBSCRIBE or update options visit: 
   http://lists.digium.com/mailman/listinfo/asterisk-users
<http://lists.digium.com/mailman/listinfo/asterisk-users>  


This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the system manager.
Please note that any views or opinions presented in this email are solely
those of the author and do not necessarily represent those of the company.



This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the system manager.
Please note that any views or opinions presented in this email are solely
those of the author and do not necessarily represent those of the company.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041105/d13c5ae9/attachment.htm