[Asterisk-Users] system errors

[kyle Hagan]

Im not running strace constantly, I just run it to see whats going on. 
And that error it coming in on the Asterisk PID at a rate of about 10 
per second, from what I can see.

here is my TOP:

Cpu(s):  86.3% user,  13.7% system,   0.0% nice,   0.0% idle
Mem:    904204k total,   862688k used,    41516k free,        0k buffers
Swap:  1004020k total,        0k used,  1004020k free,   578036k cached

PID     USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
10744 root      20   0  1400 1400 1096 R 50.0  0.2 699:46.68 asterisk  
23199 root      19   0  1408 1408 1096 R 49.7  0.2 536:18.27 asterisk
13838 root       9   0  7404 7332 3644 R  0.3  0.8   0:00.14 asterisk

its showing 50% CPU x 2.

when I strace -p 10744 or strace -p 23199 thats when I get the error.


Kyle

Steven Critchfield wrote:

>On Thu, 2004-11-04 at 10:11 -0700, kyle Hagan wrote:
>  
>
>>Im getting the following error when I do an strace -p ##### for asterisk 
>>. Its  taking alot of resources.
>>
>>ioctl(0, SNDCTL_TMR_TIMEBASE or TCGETS, 0xbffff290) = -1 EIO 
>>(Input/output error)
>>write(1, "voip1*CLI> ", 11)             = -1 EIO (Input/output error)
>>
>>I checked the WIKI and the list and found nothing.
>>    
>>
>
>strace takes a lot of resources and depending on the driver for the
>display, you can really suck a lot of CPU just trying to keep up with
>the output.
>  
>